Thread: Vacuum Lines on gen 3

original



paint shop

so the white lines are how I believe I run the lines just wanted to make sure I had this right before I ran and grabbed the lines

Boost solenoid to FPR to LIM to MAP.

Thats how the one line runs all the way around the blower.

^^ Yup, you are missing your boost solenoid.

he has the 97 sc, he has a vac tree on the front side of the charger beside the bbv

awesome thanx guys

I dont have to use that vac tree do I i noticed it came on the sc I got from bio but my old one didn't figured it was just deletable

Originally Posted by TEK310

he has the 97 sc, he has a vac tree on the front side of the charger beside the bbv

Ah, good eye!

my car is a 97 with a 98-03 SC in it, i have the lines routed for the 98+ so, if you can cap that hole, then im sure you will be fine.

here is the routes for 98+

so the whole that the vac tree sits in that isnt on there needs to be filled or capped?
could I just loop a line from each output on it?

what do you mean loop a line from each output? to answer your other question, yes it needs to be blocked off, or your will have a large vacuum leak.

He is talking about taking a vac line from the top port to the bottom one. Yes you could "loop" it. That would work.