|
|
11-29-2011
everyone knows my last gp was stolen... but recently i came across another gtp with a decent motor 170 xxx plus miles... but im really looking to take it out and rebuild it completely.. cam heads and so on.. what good combo would be a good way to make a mid to low 13 second car...
11-29-2011
you dont need heads or a cam to run mid 13s.
11-29-2011
Intercooler, rockers, headers and general knowledge.
11-29-2011
Would spark plugs, 3.6/3.5 pulley/ headers, PCM 1.0, CAI do the trick? What would you see with these mods?
11-29-2011
headers, rockers, 3.5 pulley and a 100 shot
11-29-2011
Originally Posted by jdrach
14.4-14.2
http://www.streetfire.net/video/2001...ynp_208097.htm
11-29-2011
How noticeable of an increase will i be seeing? Would you have est hp and torque? Not sure if its a worthy investment. Also don't want to be fixing these mods every month if they're un reliable. If then i should prolly just keep it stock
11-29-2011
Reliabilty should be fine granted you dont screw stuff up lol
11-29-2011
Ya I know a mechanic at work who could do it and also my dad gf who knows the GP inside and out since he's done alot of work to it. Are these parts a worthy investment that i stated? Will i be alot faster or just a little faster?
11-29-2011
intercooler is expensive.. rockers and headers are in the plan... but what ratio rockers
11-29-2011
1.84 is the highest ratio you can run without changing valve springs.
You need higher shift points to get the benefit of the rockers.
Therefore, change the springs...run 1.95's.
But, rockers are boring...I sold mine for a cam.
11-29-2011
ok so far... rockers 1.95 headers pcm 3.4 pulley and possibly a cam.. what else
11-29-2011
headers, gen v swap, 3.5, rockers, all that supporting jazz and a good tune. blame mid 13
11-29-2011
cant do rockers and a cam. one or the other
11-29-2011
Dude.
I'm sorry.
LINK IN SIGNATURE.
Read away.
11-29-2011
thats telling me about doing it safely... i wanna know whats needed for a 13 second car.. its not really telling me whats needed for the time i wanna go...
11-29-2011
headers, 3.4 pulley, 1.9 rockers, tune, HAI, good launch and some weight reduction
11-29-2011
but you have no idea how any of these mods work...or how theyd work together. so you need to start on page one.
11-29-2011
Don't want to do it safely?
Cut off your exhaust
Put a 150 shot on it
Tune it on E85 and run a 3.0" pulley with 80lb injectors and a pump re-wire.
11-29-2011
ok lemme rephrase it... ive read that about safely doing it a million times.. i just wanna know what combo works and would do what i want..... didnt think it would take all this... dam
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
