Thread: Cylinder 5 misfire trouble code P0305

Results 1 to 9 of 9
  1. #1 Cylinder 5 misfire trouble code P0305 
    SE Level Member
    Join Date
    Apr 2009
    Location
    ventura county
    Posts
    2
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    My 1999 Grand Prix (Supercharged 3800) has a little hitch in her gitty up. Ran a diagnostic and the trouble code came up P0305, cylinder 5 misfire. Makes sense right!? I have changed out the plug, wire, and the coil and she is still misfiring. Any suggestions as to a solution would be greatly appreciated. Thanks in advance, Michelle
    Last edited by michellebuck76; 04-26-2009 at 09:25 AM.
    Reply With Quote  
     

  2. #2 Re: Cylinder 5 misfire trouble code P0305 
    GTX Level Member J GTP's Avatar
    Join Date
    Apr 2009
    Location
    Maine
    Posts
    654
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Could be a cracked head gasket. Start it up and check for a hissing noise by cylinder 5. It could also be a plugged injector so you could try replacing that. It MIGHT help to run some of that bottled injector cleaner crap through a tank of gas. I've never used the stuff, I always figured it was a gimmick. It could potentially be a cheap fix, but I'd wait and see what others think.
    Reply With Quote  
     

  3. #3 Re: Cylinder 5 misfire trouble code P0305 
    SE Level Member
    Join Date
    Apr 2009
    Location
    ventura county
    Posts
    2
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Thanks for your feedback J. I tried that fuel injector stuff already and I as well believe that is a gimic or just a bandaid solution to a bigger problem to come. No hissing noise but i am going to try replacing the injectors is the cost is not too high. Thanks again for your help. Michelle
    Reply With Quote  
     

  4. #4 Re: Cylinder 5 misfire trouble code P0305 
    SE Level Member
    Join Date
    Mar 2012
    Location
    Southeast Indiana
    Posts
    16
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Purchase the set of 6 from ZZPerformance, heres's a link GM ACDelco - 33# GM EV1 Injectors #GM-0280155737-6 if you want to save the money, they are remaned/rebuilt and tested. If you want to just get 1 new injector they can run between $80-$100 to purchase.
    Reply With Quote  
     

  5. #5 Re: Cylinder 5 misfire trouble code P0305 
    GTP Level Member L36 Killer's Avatar
    Join Date
    Jul 2012
    Location
    Harrisburg, Pennsylvania, United States
    Posts
    597
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by michellebuck76 View Post
    Thanks for your feedback J. I tried that fuel injector stuff already and I as well believe that is a gimic or just a bandaid solution to a bigger problem to come. No hissing noise but i am going to try replacing the injectors is the cost is not too high. Thanks again for your help. Michelle
    Before you buy new injectors, switch the one off of cylinder 5 with cylinder 3. If the misfire changes to cylinder 3, you know it's the injector. If not, move on to the next possibility. From personal experience, I know it can get real expensive chasing down a misfire.
    "SHELLY" GRAND PRIX GT 02. SLP HEADERS & EXHAUST, K&N CAI, BMR REAR SUSPENSION AND STRUT BRACES, 180 T-STAT, AGX STRUTS, EIBACH SPRINGS, OVERKILL PCM, YELLA TERRA 1.7 ROCKERS, GT1 CAM, SEXMAN PORTED & POLISHED HEADS, STAGE 2 PORTED TB
    Reply With Quote  
     

  6. #6 Re: Cylinder 5 misfire trouble code P0305 
    GrandPrix Junkie
    Join Date
    Oct 2009
    Location
    St. Louis
    Posts
    4,787
    Thanks (Received)
    18
    Likes (Received)
    76
    Dislikes (Received)
    0
    Um, guys, this thread is 3 years old and the OP hasn't been on since 04-26-09. I would think she figured it out by now
    Reply With Quote  
     

  7. #7 Re: Cylinder 5 misfire trouble code P0305 
    GTP Level Member L36 Killer's Avatar
    Join Date
    Jul 2012
    Location
    Harrisburg, Pennsylvania, United States
    Posts
    597
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Could always help the next person who looks it up
    "SHELLY" GRAND PRIX GT 02. SLP HEADERS & EXHAUST, K&N CAI, BMR REAR SUSPENSION AND STRUT BRACES, 180 T-STAT, AGX STRUTS, EIBACH SPRINGS, OVERKILL PCM, YELLA TERRA 1.7 ROCKERS, GT1 CAM, SEXMAN PORTED & POLISHED HEADS, STAGE 2 PORTED TB
    Reply With Quote  
     

  8. #8 Re: Cylinder 5 misfire trouble code P0305 
    SE Level Member
    Join Date
    Jan 2013
    Location
    Ohio
    Posts
    1
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    It helps people like me who currently has the exact same problem and i am currently going through the steps suggested here to try and resolve the problem. Currently i have replaced the plugs and wires but no fix yet. I will try to update what the final solution turns out to be.
    Reply With Quote  
     

  9. #9 Re: Cylinder 5 misfire trouble code P0305 
    SE Level Member
    Join Date
    Dec 2008
    Location
    Essex, UK
    Posts
    21
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I've just had this happen to me yesterday, my car was fine in the morning but running sick as a dog in the afternoon. Flipped the hood and there is oil all over the front of the engine; looks like the valve cover gasket has gone again! Threw the P0305 code cylinder 5 misfire. Have ordered plugs and leads and a replacement coil,( just in case), and I've already got a spare gasket. Is there anything else I should look for, only being in the UK parts take forever to arrive here?

    Plugs and leads already on the car look original, so I'm changing those anyway. The car is a 1998 Grand Prix GT. Also threw a code for the Crank Pos Sensor, as the tacho stopped working and the Traction Off light came on.
    Reply With Quote  
     

Similar Threads

  1. Cylinder 6 misfire with a p0102
    By icolex1 in forum 3.8L V6 Naturally Aspirated (L36)(L26)
    Replies: 2
    Last Post: 04-29-2009, 05:16 PM
  2. All Cylinder Misfire after LIM Change and Vac Leak?
    By Lawngoose in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 11
    Last Post: 02-12-2009, 06:32 PM
  3. Cylinder #4 misfire
    By Kompton in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 12
    Last Post: 01-28-2009, 08:41 AM
  4. P0300 multiple cylinder misfire code
    By Reeddawgy in forum PCM Tuning
    Replies: 4
    Last Post: 07-15-2008, 07:42 PM
  5. #4 cylinder misfire
    By JCG's-GTP in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 7
    Last Post: 03-11-2008, 06:16 PM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •