2007 supercharged Balancer repair sleeve? Front seal replacement

**rickisrad** · 12-21-2020

I am getting ready to replace my front crankshaft seal and sensor on my 2007 Grand Prix supercharged series III. Does anyone know if there is a balancer repair sleeve for this model? I searched and did not find much on this. I want to have one on hand just in case there is a groove on the balancer when I get it off. Also any tips or videos on how to install the sleeve if there is one. Any help is appreciated.

Thanks

**Scottydoggs** · 12-21-2020

see if these links work, this was for my 98 regal, see if the seal part # is the same, then it should work.

https://hosting.photobucket.com/albu...psashf10yn.jpg

https://hosting.photobucket.com/albu...psjo9t0y7k.jpg

**rickisrad** · 12-21-2020

Doesn’t look like it is the same. I don’t see a front skf seal # for mine.

**Scottydoggs** · 12-21-2020

it could be any brand crank seal. if they are the same the balancer part should be the same size.

the parts store i got that at used to be a napa, now a car quest, so they still had the " books" , where they found it, then had to order it.

**rickisrad** · 12-21-2020

I looked up the harmonic balancer again on Rock Auto and decided just to get a new balancer just to be safe. It was cheap enough ($77) just to have piece of mind.