Thread: Need help with 0420 and 0128 code!!

Results 1 to 13 of 13
  1. #1 Need help with 0420 and 0128 code!! 
    SE Level Member
    Join Date
    Jan 2010
    Location
    Jackson, Mississippi
    Posts
    98
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Hey guys I've bee having some trouble with the P0420 code (catalysts system efficiency below threshold bank 1.) I purchased a blue driver code reader/scanner to monitor the live data of the O2 sensors and they both seem to be working fine. According to my research o2 sensors should give voltage readings of 0 to 0.9 which I am getting according to the live data info. The Cat converter was replaced with a new one from the dealer about 2 yrs ago so I highly doubt its a bad cat. However i did research that the P0128 code (ECT sensor) can throw a P0428 code. Som my question I guess is how do you properly diagnose a 0420 code and 02 sensors for proper operation?
    Any and all suggestions would be greatly appreciated. Thanks
    Reply With Quote  
     

  2. #2 Re: Need help with 0420 and 0128 code!! 
    Donating Users bandook's Avatar
    Join Date
    Apr 2015
    Location
    Columbus, OH
    Posts
    1,781
    Thanks (Received)
    2
    Likes (Received)
    27
    Dislikes (Received)
    0
    Monitor your coolant temp. What do you see when it's cold and warm?
    Top Swapped 01 Imp
    VS (very small?) cam, SD Headers, 2.8" pulley, 29°, ported everything, E85, AEM water/meth, Deka 60's, HPT tuned
    Reply With Quote  
     

  3. #3 Re: Need help with 0420 and 0128 code!! 
    GrandPrix Junkie SgtMarshal's Avatar
    Join Date
    Feb 2012
    Location
    Kemmerer, Wyoming
    Posts
    4,701
    Thanks (Received)
    10
    Likes (Received)
    25
    Dislikes (Received)
    0
    does your engine warm up like normal? if it doesn't then the thermostat is stuck open and that could cause a P0128 code. i've never heard of that causing an O2 sensor issue though
    Reply With Quote  
     

  4. #4 Re: Need help with 0420 and 0128 code!! 
    SE Level Member
    Join Date
    Jan 2010
    Location
    Jackson, Mississippi
    Posts
    98
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I have noticed that my temp gauge is running 170-175 after driving for 30 minutes it’s not even close to the halfway mark.
    Reply With Quote  
     

  5. #5 Re: Need help with 0420 and 0128 code!! 
    SE Level Member
    Join Date
    Oct 2012
    Location
    USA
    Posts
    70
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by mcdavidhome View Post
    Hey guys I've bee having some trouble with the P0420 code (catalysts system efficiency below threshold bank 1.) I purchased a blue driver code reader/scanner to monitor the live data of the O2 sensors and they both seem to be working fine. According to my research o2 sensors should give voltage readings of 0 to 0.9 which I am getting according to the live data info. The Cat converter was replaced with a new one from the dealer about 2 yrs ago so I highly doubt its a bad cat. However i did research that the P0128 code (ECT sensor) can throw a P0428 code. Som my question I guess is how do you properly diagnose a 0420 code and 02 sensors for proper operation?
    Any and all suggestions would be greatly appreciated. Thanks
    Regarding the P0420 code, I think the car computer compares the signals from the upstream and downstream O2 sensor to determine if the catalytic converter is effective. If the catalytic converter is working properly, the upstream O2 sensor should give readings that fluctuate and the downstream sensor should give readings fairly constant. This is because the car computer is constantly adjusting the air-fuel ratio, which leads to a fluctuating O2 from the exhaust. But the oxygen will be consumed in the catalytic converter when NOx and CO are burnt. I had a P0420 a few years ago after a misfire and I asked the shop to show me the O2 sensor reading from a GM Tech 2 reader. SO I would think a P0420 code actually point to a failed catalytic converter.
    Reply With Quote  
     

  6. #6 Re: Need help with 0420 and 0128 code!! 
    SE Level Member
    Join Date
    Jan 2010
    Location
    Jackson, Mississippi
    Posts
    98
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Ok thanks. I think when I looked at the live data I did see the upstream sensor readings fluctuate but I also think the downstream were fluctuating also but not as much as the upstream o2. Its just hard to believe that my CAT is bad again becuz it was just replaced by the dealer under warranty about 2 years ago. But thanks for the info I will go back and compare the reading and send a screen shot if possible.
    Reply With Quote  
     

  7. #7 Re: Need help with 0420 and 0128 code!! 
    SE Level Member
    Join Date
    Oct 2012
    Location
    USA
    Posts
    70
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by mcdavidhome View Post
    Ok thanks. I think when I looked at the live data I did see the upstream sensor readings fluctuate but I also think the downstream were fluctuating also but not as much as the upstream o2. Its just hard to believe that my CAT is bad again becuz it was just replaced by the dealer under warranty about 2 years ago. But thanks for the info I will go back and compare the reading and send a screen shot if possible.
    Yeah, that seems to be pointing to the catalytic converter. I just think the catalytic converter in the Grand Prix is not that long lasting. For the fours years I owned my 2005 Grand Prix base model, I had two catalytic converter broken. At least a bad catalytic converter, unless it is clogged, is not going to influence how the car drives. If your state does not do emission test and you can live with a constant on check engine light, you should be able to drive the car just fine.
    Reply With Quote  
     

  8. #8 Re: Need help with 0420 and 0128 code!! 
    SE Level Member
    Join Date
    Jan 2010
    Location
    Jackson, Mississippi
    Posts
    98
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Hey guys I have an update on the P0128 and P0420 problem I was having. As it turns out like you guys said the thermostat was stuck open thus causing the engine to not reach normal operating temperature which actually caused the P0420 code.

    The way I found out was by looking at the live data from my 02 sensors. The pre cat o2 readings and the post cat readings were very similar with the bad thermostat but after I replaced the thermostat the post cat o2 sensor reading changed dramatically. The wave

    form was almost flat which would indicate the Cat was doing its job by reducing emissions. I am honestly shocked at how many problems you can get from your engine not reaching the correct operating temperature. I really appreciate you guys helping me solve

    this problem.

    P.S. I tried to upload a screenshot of my live data so you guys can see for yourselves but was unable to because I exceeded the size limit by 25kb. I will see if I can shrink the image and try to post it later. Once again thanks for your help!!
    Reply With Quote  
     

  9. #9 Re: Need help with 0420 and 0128 code!! 
    SE Level Member
    Join Date
    Jan 2010
    Location
    Jackson, Mississippi
    Posts
    98
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by mcdavidhome View Post
    Hey guys I've bee having some trouble with the P0420 code (catalysts system efficiency below threshold bank 1.) I purchased a blue driver code reader/scanner to monitor the live data of the O2 sensors and they both seem to be working fine. According to my research o2 sensors should give voltage readings of 0 to 0.9 which I am getting according to the live data info. The Cat converter was replaced with a new one from the dealer about 2 yrs ago so I highly doubt its a bad cat. However i did research that the P0128 code (ECT sensor) can throw a P0428 code. Som my question I guess is how do you properly diagnose a 0420 code and 02 sensors for proper operation?
    Any and all suggestions would be greatly appreciated. Thanks
    UPDATE!!!! Hey guys I have an update on the P0128 and P0420 problem I was having. As it turns out like you guys said the thermostat was stuck open thus causing the engine to not reach normal operating temperature which actually caused the P0420 code.

    The way I found out was by looking at the live data from my 02 sensors. The pre cat o2 readings and the post cat readings were very similar with the bad thermostat but after I replaced the thermostat the post cat o2 sensor reading changed dramatically. The wave form was

    almost flat which would indicate the Cat was doing its job by reducing emissions. I am honestly shocked at how many problems you can get from your engine not reaching the correct operating temperature. I really appreciate you guys helping me solve this problem.
    Reply With Quote  
     

  10. #10 Re: Need help with 0420 and 0128 code!! 
    SE Level Member
    Join Date
    Jan 2010
    Location
    Jackson, Mississippi
    Posts
    98
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by mcdavidhome View Post
    Hey guys I have an update on the P0128 and P0420 problem I was having. As it turns out like you guys said the thermostat was stuck open thus causing the engine to not reach normal operating temperature which actually caused the P0420 code.

    The way I found out was by looking at the live data from my 02 sensors. The pre cat o2 readings and the post cat readings were very similar with the bad thermostat but after I replaced the thermostat the post cat o2 sensor reading changed dramatically. The wave

    form was almost flat which would indicate the Cat was doing its job by reducing emissions. I am honestly shocked at how many problems you can get from your engine not reaching the correct operating temperature. I really appreciate you guys helping me solve

    this problem.

    P.S. I tried to upload a screenshot of my live data so you guys can see for yourselves but was unable to because I exceeded the size limit by 25kb. I will see if I can shrink the image and try to post it later. Once again thanks for your help!!
    Dropbox - Bad thermostat..jpg - Simplify your life

    Dropbox - New thermostat..jpg - Simplify your life
    Reply With Quote  
     

  11. #11 Re: Need help with 0420 and 0128 code!! 
    Donating Users bandook's Avatar
    Join Date
    Apr 2015
    Location
    Columbus, OH
    Posts
    1,781
    Thanks (Received)
    2
    Likes (Received)
    27
    Dislikes (Received)
    0
    Glad to hear! Yeah man, the ect effects many things in the computer. I often wonder how many good O2 sensors are in the landfills. I bet AutoZone has sold millions of new ones to folks that had the code, but the code was triggered to a different failing component.
    Top Swapped 01 Imp
    VS (very small?) cam, SD Headers, 2.8" pulley, 29°, ported everything, E85, AEM water/meth, Deka 60's, HPT tuned
    Reply With Quote  
     

  12. #12 Re: Need help with 0420 and 0128 code!! 
    SE Level Member
    Join Date
    Jan 2010
    Location
    Jackson, Mississippi
    Posts
    98
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Thanks!
    Reply With Quote  
     

  13. #13 Re: Need help with 0420 and 0128 code!! 
    SE Level Member
    Join Date
    Jan 2010
    Location
    Jackson, Mississippi
    Posts
    98
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by Coldwaves View Post
    Yeah, that seems to be pointing to the catalytic converter. I just think the catalytic converter in the Grand Prix is not that long lasting. For the fours years I owned my 2005 Grand Prix base model, I had two catalytic converter broken. At least a bad catalytic converter, unless it is clogged, is not going to influence how the car drives. If your state does not do emission test and you can live with a constant on check engine light, you should be able to drive the car just fine.
    Yes my state does not do emission test and I could easily cut my CAT off but I'm afraid that without the cat I would get bad gas mileage due to the O2 sensor readings being off. I have heard some people say you can do the non spark fouler trick to get the o2 sensors to show good readings to fool the Computer but I don't know how reliable that is..
    Reply With Quote  
     

Similar Threads

  1. 2001 grandprix gt p0446 code..no converter but no P0420 code...
    By chicagochuck in forum General Grand Prix Discussion
    Replies: 1
    Last Post: 12-13-2016, 01:59 PM
  2. Replies: 8
    Last Post: 02-21-2015, 07:08 PM
  3. HELP Needed! Car surging P0102 code and P1655 code im STUMPED
    By 97gtpjoe in forum General Tech Discussion
    Replies: 2
    Last Post: 02-06-2014, 12:15 PM
  4. '99 Grand Prix GT has code 1810, yet runs great as always, so why the code?
    By McFly1999 in forum 1997-2007 4 speed Automatic (4T65E) (4T65E-HD)
    Replies: 16
    Last Post: 03-03-2012, 07:52 AM
  5. 0420 code
    By gotboost3 in forum General Tech Discussion
    Replies: 1
    Last Post: 03-01-2009, 12:24 PM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •