|
|
07-29-2019
Hey all, I am going to be installing a ZZP down pipe and a new resonator, the bolts that connect the down pipe to the factory resonator are severely rusted and will need to be replaced. I am curious what size and length i need to get that will work properly. Any info would be greatly appreciated, thanks!
07-30-2019
youre putting in a new resonator and downpipe right just get some big bolts that fit in the holes and get them long enough that they go thru the flanges of your new items get some nice ones with corrosion protection if you can and make sure you tighten them down to spec according to the bolt maybe get a fine thread for more torque. you can do it all while the new parts are off the car
07-30-2019
I think they are m10-1.50.
But most likely you will break them off when trying to remove them. I usually end up drilling them out and just using a pair of 3/8" bolts for the connection.
07-30-2019
Ya the reason I am installing a new resonator with the down pipe is because the flange from the down pipe to the resonator is all rusted together and everything, still have all factory hardware down there
07-30-2019
yea mine snapped clean off with the flange lol I just had someone weld the pipe to the new flange
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
