Hi, I’m new to the forums and was hoping to get some help before I get started.
Little back story on the car:
I really purchased a 04 GTP as a little project car. So far what I know about it(what the previous owner told me and my quick walk around). I was told it needed headgasket and that it didn’t start due to that. Now I’m familiar with the 3.8 and 3.4 motors and I knew that shouldn’t cause the no start problem.
Long story short, it cranks over fine but doesn’t start. I’ve pulled a decent amount of codes with my obd:
P0030 - Heater Control Circuit
P0036 - H02S Heater Control Ciruit
P0201-6 all injectors are bringing up a open circuit
P0243 - Supercharger wastegate solenoid A
P0443 - Purge curge control valve circuit
I was hoping to get some opinions before I start looking deeper into it, finishing up another project right now and would like a head start into this one. My guess is maybe the fuel injectors ground is bad or the PCM? But willing to listen to others who’ve pulled similar codes and what fixed their problem or point me in the right direction.