Sent from my SM-N900T using Tapatalk
|
|
03-21-2016
Sent from my SM-N900T using Tapatalk
03-21-2016
Oh, i see.... srry, I'm new to this and I was counting from right to left
Sent from my SM-N900T using Tapatalk
03-21-2016
I have some major questions but I would rather do it by phone. Is there any way I could talk to you about these things?
Sent from my SM-N900T using Tapatalk
03-21-2016
You had say the 10th digit is a W but on my 99 it's a X, what's up with that? It was a 3800
Sent from my SM-N900T using Tapatalk
03-21-2016
Sent pm
Sent from my SM-N900T using Tapatalk
03-21-2016
im sorry i misspoke 4th gigit is always the W/body/chassis designation, 10th is the year
03-21-2016
Ok, but I still have alot more questions lol. About some swaps and one that has been modded
Sent from my SM-N900T using Tapatalk
03-21-2016
The 98 gtp is parts because someone rolled it. My 00 blew the motor. Can I take the gtp subfram and all out and put it in the 00. What else would I need to transfer?
Sent from my SM-N900T using Tapatalk
03-21-2016
The other 98 that I have has been modded and I'd like to know how much maybe. All I know right now, it has slp headers. What else can I see without digging into it to much? Looks as though it has a new water pump also but may just be stock type
Sent from my SM-N900T using Tapatalk
03-21-2016
Minor, but perhaps worth mentioning that you'll need to budget a throttle body adapter, motor mounts (iirc they are different due to the newer oil pan design), perhaps a few other minor things for your swap if you go the L32 route.
03-21-2016
So what I am gathering is I am best to stay with an l67 shortblock (or long depending on prices) and use that as the swap for my 2001 gtp
03-21-2016
One other question being I didn't tear mine all the way down yet, what are the odds that I burnt a piston and my block still being good after some honing? . . . Maybe I would be better just putting new pistons and rods in my block with the money I save from not buying a separate block
03-21-2016
you can still get a l32, and re use your lim and blower and tb. your changing the lim gaskets anyway. sell the gen 5 blower for a couple hundos.
03-21-2016
So which has better rods though, l67 or l32? Don't plan on making enough power to break one either way but really don't want to snap one 20 miles down the road
03-21-2016
l67 has better rods, but the l32 rods are just fine too. its a non issue really.
03-21-2016
Ok, I might have found a decent l32 complete just waiting on getting it started to see if she runs good
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
