till they look smooth. your only doing light pressure, its not like you can grind em to nothing, unless the pitting is that deep.
even the valve seats were pitted up some.
before.
after
|
|
02-07-2016
till they look smooth. your only doing light pressure, its not like you can grind em to nothing, unless the pitting is that deep.
even the valve seats were pitted up some.
before.
after
02-07-2016
That looks damn good.Originally Posted by Scottydoggs
till they look smooth. your only doing light pressure, its not like you can grind em to nothing, unless the pitting is that deep.
even the valve seats were pitted up some.
before.
after
02-07-2016
This us what i got
Sent from my LG-D851 using Tapatalk
02-07-2016
one more time then. its close.
02-07-2016
Ok thanks scotty i gotta go to work ill update with more pictures later!
Sent from my LG-D851 using Tapatalk
02-09-2016
I paid 150 bucks for a shop to do my heads I have on now to get a valve job like that, and you did it yourself. good job.
02-10-2016
Hey quick question im about to buy my sd headers is there any difference in the ones they have on ebay and the ones on their website?
Sent from my LG-D851 using Tapatalk
02-10-2016
Probably just the price
02-10-2016
Also im buying all my bolts and gaskets right now do i need a new crankbolt? I didnt think so but noticed zzp had it in there top swap gasket kit
Sent from my LG-D851 using Tapatalk
02-10-2016
re use the crank bolt.
02-10-2016
Ok thanks everybodyy!!
Sent from my LG-D851 using Tapatalk
02-11-2016
Ok so im getting my heads put back together minus the 1.9 rockers im still trying to find. I got felpro valve seals and im confused if im supposed to take the metal rings off to install them or just force it on?
Sent from my LG-D851 using Tapatalk
02-11-2016
force it on.
02-11-2016
Ok thanks
Sent from my LG-D851 using Tapatalk
02-11-2016
yup, just push em on. if you got felpros mine came with a plastic condom to cover the locks so the seal slides past them smoothly and dont tear the seal up.
you can also use like a 10 mm deep socket to push them all the way down.
02-11-2016
Well im just having trouble getting them over the valve guide's
Sent from my LG-D851 using Tapatalk
02-11-2016
a thumb on both sides and push down. they are tight. why the socket helps, you can tap em on and down all the way.
02-11-2016
Ok thanks scotty
Sent from my LG-D851 using Tapatalk
02-11-2016
if you got a 3/8 drive 10 mm, put the ratchet side down, so its a flat area pushing the seal down.
02-11-2016
Will doo!
Sent from my LG-D851 using Tapatalk
| « Previous Thread | Next Thread » |
| Bookmarks |
Bookmarks |
