Thread: What did you do to your car today? Vol 2.0

Originally Posted by Bronco Boy

I thought I read way back that the 6" only needed minor modifications to fit. I say do it if you have the speakers. I had the 5.25's laying around, so they went in.




Always enjoy pics and projects. Post 'em up.

My 97 had 6" in the front. I went to replace them with new and ordered 5.25" according to factory specs without pulling door panels and since I already had them that is what went back in. I didn't take note of mods. If there were any it was minimal.

Originally Posted by CHI2000GTP

Appears that links aren't working either. They are Nazis over there. Holy cow. Here is what I get when I click on those links:

Right click the logo and hit 'open image in new tab'

Originally Posted by Bronco Boy

That doesn't work for me.

Once you hit Scottys link it goes to Facebook and that 3rd party things shows up? Right click the logo thing, because there is no picture, with open image in new tab.

Sumbtch it has worked for me on any defunct picture from anywhere if it doesn't pop up right away.

Originally Posted by Bronco Boy

When I open it, it takes me to http://www.supermotors.net/getfile/1...e/untitled.jpg, and all I see is the same image as CHI2000GT his post. Nothing to click on it at all.

Well it shouldn't be going to supermotors.
CHI is using supermotors now too, so it must be something with the settings making supermotors your image viewer.

slotting struts tomorrow not today


That there looks like a certified Grand Prix owner

OK so I was going to get some burr bits and a die grinder but my compressor is a pussay.

So I bought these Dremel tungsten carbide burrs for a whoppin $14. Turns that little fcker into an animal.

https://www.amazon.com/gp/product/B0...E4AIME7X&psc=1
All I needed was one bit to get 2 degrees on the passenger rear and 1.5 on the drivers side.
Slotted the top and used this Android spirit level to figure out the difference from last weeks alignment.

Originally Posted by spazzz

OK so I was going to get some burr bits and a die grinder but my compressor is a pussay.

So I bought these Dremel tungsten carbide burrs for a whoppin $14. Turns that little fcker into an animal.

https://www.amazon.com/gp/product/B0...E4AIME7X&psc=1
All I needed was one bit to get 2 degrees on the passenger rear and 1.5 on the drivers side.
Slotted the top and used this Android spirit level to figure out the difference from last weeks alignment.

Thats pretty nifty. Is your compressor tight or is it like tossing a hotdog down a hallway? Heckuva bunch of burrs you got for the price. I used a Dremel on mine too, but like a $4 4pc set. Amazing how much a nice sharp burr can do.

I haven't noticed any more hot flashes with my GTP, its doing good. Done some blog updates lately though, for them that like old fixed junk-

https://chevroldsmobuiac.blogspot.com/

Red neck muffler repair on the 03 GTP.



Sent from my iPhone using Tapatalk

Maybe. It is a diced tomato can thickest I could find. Some mesh and putty under the can and then wait a day and puttied up the rest of the seam. We will see how long it lasts. Got 5 bucks into it.

I would take that 90 dollar system in Spokane if someone wanted to deliver it to Minnesota. 🤔


Sent from my iPhone using Tapatalk