What did you do to your car today? Vol 2.0

**WarStryker13** · 08-25-2016

wut wut, cooler trannys.

**Gatorvol** · 08-26-2016

Scored a trunk lid w/spoiler and rocker pan's from a buddy's wrecked '06 GP for $40 in good shape too. Gonna use the trunk lid on my GXP (same part #'s) and since I can't find a GXP spoiler I'm thinking of leaving this one on. We'll see how it looks after install. Not sure about the rockers according to GM the part #'s match but we'll see.

**Bronco Boy** · 08-26-2016

Replaced a "non-working" fog light fuse. Third time its failed since switch to a delay-on relay. Fuse wasn't blown; visually was fine but had no continuity.

Next project, replace delay-on relay with regular relay. LOL

**Russosaur** · 08-26-2016

Warshed it

Sent from my SM-S902L using Tapatalk

**Scottydoggs** · 08-26-2016

so how she running for ya so far? still driving with no radio listening for something to go wrong? lol

**Russosaur** · 08-26-2016

Running fine, slowest e85 car ever but oh well l

I'm trying to convince a friend to send me a 3.2 and see if it asplodes

Sent from my SM-S902L using Tapatalk

**Scottydoggs** · 08-26-2016

hi comp blocks area frigging let down.

**WarStryker13** · 08-26-2016

I got a 2.8 if you wanna see some fireworks. Lol

**Russosaur** · 08-26-2016

Max all the injectors and all the boosts

Sent from my SM-S902L using Tapatalk

**Hpiracr28** · 08-26-2016

Finally getting my GP on the road on the 1st after sitting for over a month. Can't wait to drive it. Been driving my wife's 2012 Chrysler 200. Good on gas but a turd with the 2.4. Can't wait to get back into a V6.

**SaukRapids** · 08-27-2016

I cleaned the crap from behind the tail lights and around the decklid. So sick of that mud dripping down after rain, lol.

**Bronco Boy** · 08-27-2016

Swapped the stock corner lights back in. My left clear corner has a broken mount, so now I can tinker on fixing that.

Dry tested my LED fogs; working good. Just have to make two wiring adapters and they can go on the car.

Replaced the "delay-on" fog light relay with a regular one.

Lastly, replaced a burnt out LED license light. Didn't have the correct replacement, so put an older Piaa LED bulb in until I can get the correct one from Diode Dynamics.

**idrivejunk** · 08-27-2016

I actually slid a jack and cardboard creeper under the GT. Heck it got washed last weekend. Anyway I was hunting for what makes the little spot in the street under it again. Found nothing, maybe. Only thing showing any sign of possible small leak was trans lines at rad. Maybe I didn't replace O-rings when I did new rad years ago. If that's all it is, no worries the spot can stay lol.

**WarStryker13** · 08-27-2016

Made a template for front STB brackets... I don't like drilling holes when I don't have to, and maybe I can make a few extra and spread the love. Lol

I'm thinking 3/16th inch steel, with studs on the inside for the braces to just drop onto.

**Bronco Boy** · 08-27-2016

I want to see a side by side comparison on these LED fogs compared to my current HID set-up, so I installed the left side. I'm taking wagers on how un-level the beam will be. LOL

Now hurry up and get dark!

**Russosaur** · 08-27-2016

First highway drive on kern, got 20-21. ****ty michigan highway with hills

Sent from my SM-S902L using Tapatalk

**Centauri** · 08-28-2016

New smoked black LED tails, debaged GP logo and replaced it with the L67 one.

Sent from my LG G4 with Tapatalk

**Bronco Boy** · 08-28-2016

Not quite sold on these fogs. Probably because I'm used to the great yet glaring light from my current HID foglight set-up. Headlights and HID fog are 5000 kelvin, and the new LED is 5500 kelvin. I installed the left LED fog and left the right side with the HID.....

HID fog only:

LED fog only:

Both lights:

Maybe I'll install the right side and run them for a while. U dunno. LOL