|
|
09-09-2013
got a question for yall when im in 1 or 2 not in d and im at low rpms if I take my foot off the gas and then apply it I feel a thud like the motor or tranny is engaging this also happens at low rpms in 2 not sure if its the tranny or engine mount I already changed to poly uppers thanks for the help
09-09-2013
if your goosing the gas pedal, on and off real fast in a low gear your feeling the engine and trany trying to roll over under the hood. your mounts are probably in bad shape as well as the dog bone mounts. if you flip the bushings for the dog bones it makes the engine a bit tighter.
09-09-2013
I already changed the dog bone mounts with polyurethane and yes that's what they feel like the only time I feel it is when the hear is in "1" or "2" at low rpms and not high im guessing it wouldn't hurt to change the mounts anyways since the car is used
09-09-2013
check the lowers out, they dont cost all that much really. easy to change as well.
09-09-2013
know of any places that sell solid ones and not hydraulic aren't they like 40 a piece
09-09-2013
i just threw a set of duralast mounts in my regal, about 40 each. im all stock so i really dont need solid anything right now. i got about 8,000 miles on them. seem to be holding up ok.
09-09-2013
Napa has mounts that claim to be a solid rubber mount, I've heard they're like oem but I don't know for sure. You didn't post what car you have so I can't get part #'s. When I look up engine mounts for my car on advance's page, they show the hydraulic looking mount, but when they hand you the part it looks like the solid rubber mount.
They say solid rubber mounts look like this:
And hydraulic mounts look like this:
09-09-2013
my bad buddy I have an 05 grand prix gtp non comp gOriginally Posted by 02NavyBlue
Napa has mounts that claim to be a solid rubber mount, I've heard they're like oem but I don't know for sure. You didn't post what car you have so I can't get part #'s. When I look up engine mounts for my car on advance's page, they show the hydraulic looking mount, but when they hand you the part it looks like the solid rubber mount.
They say solid rubber mounts look like this:
And hydraulic mounts look like this:
09-09-2013
There is a writeup on how to make your hydraulic mounts solid someplace. Iirc you drill some small holes in the rubber and drain out the fluid then refill the space with window urethane.
Originally Posted by The Sunfire Guy
09-09-2013
yea I could do that but would be simpler to find a solid one im sure someone has found some
09-09-2013
Ok 04+ have completely different mounts it looks like. That's going by what comes up on advance's page anyway.
09-09-2013
05 2005 Pontiac Grand Prix Engine Mount - Engine Mechanical - Anchor, DEA, Westar, Front, Front Right, Rear - PartsGeek
the westar says if you want a solid you add s suffix,
6th one down on that site 35$
09-10-2013
How do you add the s suffix to your order ?
09-10-2013
no idea,
Westar EM2906S MOTOR MOUNTS Eng/trans Mount
I went to westar's web site and they gave a part no. of em2906, and em2906s, (s for solid) so with those numbers I found this site for you.
Please find out for sure if this part number is correct by cross referencing. I don't wont to be responsible for any wrong parts. The picture of the mount is not correct but youll see that when you go there (it says in the picture to). If you type in the part no. without the "s" it does show the correct pic for the hydraulic mount. So I do think this is the correct mount, and it seems to be cheaper at 28$
this one below is the hydraulic filled one
Westar EM2906 MOTOR MOUNTS Eng/trans Mount
09-11-2013
hmm yea couldnt find the solid might ge tthe duralast from autozone
09-11-2013
that will be a great mount for you
edit:
I already found you one, part no. and everything, I just want you to double check
westar em2906S
Last edited by Seachicken; 09-11-2013 at 08:52 PM.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
