had my stuff shipped to the states to save shipping and brokerage. Put them on during a road trip. 2 Borla Pro XS Mufflers, ZZP 2.5" 304SS Catted Downpipe, and some rounded dual tips.
CAM00002.jpg
CAM00003.jpg
CAM00007.jpg
CAM00006.jpg
CAM00004.jpg
|
had my stuff shipped to the states to save shipping and brokerage. Put them on during a road trip. 2 Borla Pro XS Mufflers, ZZP 2.5" 304SS Catted Downpipe, and some rounded dual tips.
CAM00002.jpg
CAM00003.jpg
CAM00007.jpg
CAM00006.jpg
CAM00004.jpg
Nice
Might be pushing it close. SD don't seem to give to much room. A better choice would be Vinnie Spacers. What's the reasoning behind you wanting shorter dogbones? Are you lower?
You gonna give us a vid or what!
I'm not back home yet, and my good phone with 1080p video is in for service. I'll post as soon as I can!!
From the very limited driving I've done since getting it done I can tell you it's a lot deeper than stock, there is some drone but NOTHING compared to having a rotted out muffler and shot cat. It backfires after WOT pulls, and has a nice rumble at idle.
yessir, wasn't going to make the same mistake again. I once got rid of it on my 99 because it was cracked and it was one of the worst things I had ever done, SO MUCH RASP
if it occured after you put the cat in its probably the cat but it could possibly be the downstream O2 sensor giving a bad reading but obviously its more likely to be the cat. which ever the case get a simulator itl fix both problems and probably cheaper and faster than a tune.
I had a p0420 before I put any of the exhaust parts on. Had the parts put on, they reused o2s, cleared code and it was good for about a day.
Threw a p0420 on the new stuff after about an hour into my drive from Toledo to Toronto.
Just realized they don't make an o2 simulator for 04+
Simulator don't work with the 04+. A cheaper and efficient solution is google spark plug fouler trick and goodbye po420 code.
« Previous Thread | Next Thread » |
Tags for this Thread |