I got home. Thank god.
Thank u fivefinger you were right.
I hope its only the maf sensor.
Ill try to get one from a junk yard.
|
|
03-28-2013
I got home. Thank god.
Thank u fivefinger you were right.
I hope its only the maf sensor.
Ill try to get one from a junk yard.
Last edited by raverockstar; 03-28-2013 at 11:11 PM.
03-29-2013
Is it ok to get one from a junk yard that maybe from an SE or gtp and 97-03 and use it for my gt or i have to spend 150 for an after market one at autozone?
03-29-2013
on top of the MAF is a part #. look for that # only. they are the same in n/a engines as well. 97, 98 are the same, 99 is a different #.
im running a JY maf for 2 years now.
03-29-2013
Yep, JY or dealer on these. Aftermarket (Autozone,etc.) seem to have a high failure rate.
03-29-2013
will the maf sensor from a 3100 will work on my 3800?
03-29-2013
like i said, top of the maf is a part #. if it matches, it will work.
03-29-2013
Yeah tnx. I wanted to know cz the junk yard said they have only 3100
I didnt wanna go there for nothing.
It doesnt match though. I found out.
03-29-2013
give the part # to the guy on the phone at the jy. most of the time they have a clue, or will check for you.
by me its all inventoried, you call and they know if they have it or not.
03-29-2013
Ohhh weird.
I just went to check on the car
I plugged in the maf sensor and the car turned on.
I still have check engine light on.
The air intake making a lot of noise
And the rpm goes up to 2k and goes back to 800 when i start the car.
** and fail again
Last edited by raverockstar; 03-29-2013 at 06:28 PM.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
