Thread: Why am I getting KR

Results 1 to 6 of 6
  1. #1 Why am I getting KR 
    SE Level Member
    Join Date
    Oct 2012
    Location
    south bend Indiana
    Posts
    3
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I'm stumped, 2000 GTP getting allot of kr. I have gen v, cai, 180 stat, WBS full stack intercooler, and headers running a 3.3 pulley on a zzp 1.0 tune. Ngk tr6 plugs. Temp outside is 60 degrees and everytime I start to build boost past 5psi I'm getting 5* or more kr and it seems to be getting worse. Please help
    Reply With Quote  
     

  2. #2 Re: Why am I getting KR 
    Turbo is the way to go. Fivefingerdeathpunch's Avatar
    Join Date
    Sep 2009
    Location
    Rogers, MN
    Posts
    21,022
    Thanks (Received)
    21
    Likes (Received)
    45
    Dislikes (Received)
    0
    How close are you to needing more fuel, just to rule out that out??

    Do you have a wideband gauge?

    Can you watch fuel pressure??

    If it's going lean that could do it.

    SMGPFC Member #1
    Reply With Quote  
     

  3. #3 Re: Why am I getting KR 
    GrandPrix Junkie
    Join Date
    Oct 2009
    Location
    St. Louis
    Posts
    4,795
    Thanks (Received)
    18
    Likes (Received)
    76
    Dislikes (Received)
    0
    Is the exhaust/headers hitting the firewall? That will cause false knock also depending on the header setup you have.

    And yea, what FFDP said, you need to scan it and see what's going on before "chip" decides to pay you a visit.
    Reply With Quote  
     

  4. #4 Re: Why am I getting KR 
    GXP Level Member Turbocharged400sbc's Avatar
    Join Date
    Jan 2008
    Location
    hangover park IL
    Posts
    2,714
    Thanks (Received)
    4
    Likes (Received)
    11
    Dislikes (Received)
    0
    yours is around the right year so id also suggest checking the pcm label to confirm its hardware number ends in 0411 iirc

    twice ive come across knock lobsters that went as far as an entire new engine, to find that the "parts bin" oem pcm was the culprit after putting in the 0411 "full feature" pcm, with the exact same bin file loaded.

    followup with above suggestions but ill also add to it, confirm your plastic fuel lines have no "splice/repair" sleeves inside, these will kill fuel pressure if on the pressure line, the ID is about 1/3rd the area of the 3/8ths hose
    ~James~ Psychotic Gearhead
    projects: 84 Cressida waGN~ 90 LN3 3800, equal length headers, T70, 89 700r4, misc parts,
    1994 Oldsmobile 442 (462ci-4wd-2 engines) L67/4t80e^2,
    00 Turbo Regal 608 fwhp 575ftlbs at 5500rpm, 98 WhippledRiv, 97 GTP
    Reply With Quote  
     

  5. #5 Re: Why am I getting KR 
    SE Level Member
    Join Date
    Oct 2012
    Location
    south bend Indiana
    Posts
    3
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I don't have a wide band, all I have is a scan guage II, I'll have to check on the pcm # tonight. But could a older in line fuel filter cause low fuel psi?.
    Reply With Quote  
     

  6. #6 Re: Why am I getting KR 
    Turbo is the way to go. Fivefingerdeathpunch's Avatar
    Join Date
    Sep 2009
    Location
    Rogers, MN
    Posts
    21,022
    Thanks (Received)
    21
    Likes (Received)
    45
    Dislikes (Received)
    0
    All those mods and no wideband?

    That sounds dangerous.

    And yes a old/clogged filter will cause low fuel pressure. Getting a wideband to know what the fueling is doing is a pretty good idea, that's putting a lot of trust in the tune without one. And get a fuel pressure gauge on it while your driving, tape it to the windshield to see if it's dropping under heavy load.

    SMGPFC Member #1
    Reply With Quote  
     

  7. Likes Scottydoggs liked this post
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •