Low Beams don't work but high beams do

**Pursell1911** · 08-13-2018

2006 Grand Prix GT

So out of nowhere my low beams stopped working, both at the same time.

Here's what I've done so far.

1. Verify that the low beam bulbs were not broken (I'm assuming this is the same as a regular light bulb?) The filament was not broken inside?
2. Replaced the headlight relay in the fusebox
3. Check to see if any wiring was cut, etc.

What should I check next?

Matt

**FordMan77** · 08-13-2018

Give these threads a try.

Another low beam headlight issue. Please help.

Low beams not working .... Again !!

**Pursell1911** · 08-14-2018

Thanks FordMan

**jeffwilson34** · 08-14-2018

I had the same issue, I had to replace the turn signal stalk/switch

**Pursell1911** · 08-15-2018

Was that easy to do? I think that's what I may need to do as nothing I've done has restored functionality.

**jeffwilson34** · 08-15-2018

The hardest part is the torex screw that is a PIA to get to. Once you get the plastic molding off the wheel it is not that bad.
You DO NOT have to remove parts of the dash like in some videos on youtube the cover can be pried apart and put back with using those plastic molding tools made for removing door panels. Once its off it is two screws and a plug.

**Pursell1911** · 08-17-2018

Well thankfully I won't need to do this as the lights started working again. I was working on it yesterday and I replaced a busted turn signal light. I then turned my attention back to the low beams and just moved the wires around, and for some reason or another when I was putting the bulbs back into the housing they started working again. No clue...