Thread: new hubs... still abs issue

Hi guys......I was getting code c0245(wheel sensor frequency malfunction) and code c0035(left front speed sensor circuit malfunction) for some time now on my 2005 GP so I assumed it was a bad front hub.....so I purchased 2 skf hubs and installed them just yesterday , but still getting the exact same 2 codes. I'm assuming its a wiring issue somewhere any ideas where to start or a way to test my abs connections ? Does the abs harness unplug so I could replace that...any help would be greatly appreciated.

Thank you......i'll have a look. Before you fixed the wire was the abs/tc light on all the time or just periodically?

Before I changed the front hubs the light would come on as soon as the car moved.....now after new hubs it will come on after a short period of driving(sometimes as soon as the car moves, but not every time anymore)....sometimes the TC light will flash on then off then after about 10 seconds the abs and tc will come on and stay on until i shut the car off.

What year is it?

Its a 2005....it's acting strange....went to work this morning about 10 km...no abs/tc light came on, but on the way home from work didn't even get out of the parking lot and they lit up lol.... gonna have a look at it on the weekend, can't get time til then.

Maybe the abs pumps ****ting out. First you have to test and look at the wires to make sure none are broken. Also the terminals on the abs plugs are know to get corroded over time. clean those up too

Will do....another thing I noticed today is that when u apply the brakes very slowly the the brakes react as if the abs is engaged.

I got to test them with my meter ...funny thing is i'm getting the same reading on the good side as I am on the bad side. I did open up the loom to get at the wires, but on mine after you open up the loom there is a hard plastic covering over the wires as well. ..... this plastic covering was broke at one place about 3 inches from the plug(right at a bend) where you could see the 2 wires. Right where the plastic was broke one wire looked like the bend in it made it quite weak so i cut off about an inch on both sides and soldered it together. I drove home( about 15km) and so far no lights ...........fingers crossed but i'm almost expecting to see them soon lol.

That was the fix for the abs/tc light...hasn't come on again....6 days! I do however believe that one of the hubs are defective as on occasion when i'm at a stop and start to move I get a fairly loud noise with a vibration which lasts for about 10 feet. And of course I ordered them from rock auto not a local parts store

I'll see how much it will cost to ship it back...if it's outrageous i'll probably just buy another ...if so don't know if i'll go skf again .

Yeah problem is the part stores around here carry mostly garbage(for a lot more as well) I asked for timkin or skf and they said they don't carry them...that's why I went to rock auto. got the skf for 110 with 3 yr warn and expected life of 100,000 miles...I'd gladly pay the extra 20 dollars if I could get them here...you're in the states so prolly a bit easier for you to get them.