Thread: Lowering springs stock struts having to mod holes?

Results 1 to 7 of 7
  1. #1 Lowering springs stock struts having to mod holes? 
    GT Level Member
    Join Date
    Jan 2012
    Location
    N/A
    Posts
    329
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    My buddy told me i have to oblong the lower 2 strut holes before i get an alignment ? Is this true
    Reply With Quote  
     

  2. #2 Re: Lowering springs stock struts having to mod holes? 
    Turbo is the way to go. Fivefingerdeathpunch's Avatar
    Join Date
    Sep 2009
    Location
    Rogers, MN
    Posts
    21,022
    Thanks (Received)
    21
    Likes (Received)
    45
    Dislikes (Received)
    0
    No.

    Throw everything on the car and go get an alignment.

    If the alignment is out you have a few options for the camber. You can run camber bolts or have the upper bolt holes on each strut oblonged. The bottom bolt holes dont get touched.

    Most guys will run -1.0 to -1.7 of camber and it will be just fine.

    SMGPFC Member #1
    Reply With Quote  
     

  3. #3 Re: Lowering springs stock struts having to mod holes? 
    GT Level Member
    Join Date
    Jan 2012
    Location
    N/A
    Posts
    329
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Ok, i got the DNA springs so not that much of a drop
    Reply With Quote  
     

  4. #4 Re: Lowering springs stock struts having to mod holes? 
    GTX Level Member QUICKSILVER462's Avatar
    Join Date
    Jun 2009
    Location
    HUDSON
    Posts
    1,133
    Thanks (Received)
    3
    Likes (Received)
    8
    Dislikes (Received)
    0
    Front Camber Adjustment
    Removal Procedure
    Click to Enlarge
    1. Raise the vehicle and provide suitable support. Refer to Lifting and Jacking the Vehicle in General Information.
    2. Remove the tire and wheel assemblies from the front and the rear axles. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
    3. Remove the strut from the vehicle. Refer to Strut Assembly Replacement in Front Suspension.
    4. Place the strut in a vise and file the hole lateral (oblong). Compare the appearance of the holes before filing (2) with after filing (3):
    - File the lower strut-to-knuckle attaching hole for a front camber adjustment (as in the first illustration).
    - File the upper strut-to-knuckle attaching hole for a rear camber adjustment (as in the second illustration).
    Installation Procedure
    Click to Enlarge
    Caution!
    Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring
    the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces
    unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when
    installing fasteners in order to avoid damage to parts and systems.





    Reply With Quote  
     

  5. #5 Re: Lowering springs stock struts having to mod holes? 
    GT Level Member
    Join Date
    May 2012
    Location
    Albuquerque, NM
    Posts
    294
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    With just springs, does one "need" an alignment or just good practice?
    Reply With Quote  
     

  6. #6 Re: Lowering springs stock struts having to mod holes? 
    DUI BABY Bio248's Avatar
    Join Date
    Jan 2008
    Location
    MILWAUKEE
    Posts
    31,340
    Thanks (Received)
    0
    Likes (Received)
    1
    Dislikes (Received)
    0
    yes. you must do an alignment any time you change anything on the suspension.
    Reply With Quote  
     

  7. #7 Re: Lowering springs stock struts having to mod holes? 
    GT Level Member
    Join Date
    May 2012
    Location
    Albuquerque, NM
    Posts
    294
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Damn, guess I'll have to get it all at once then.
    Reply With Quote  
     

Similar Threads

  1. stock springs/struts
    By t wizzle17 in forum Brakes/Suspension/Chassis
    Replies: 2
    Last Post: 04-06-2013, 04:30 PM
  2. Anyone running AGX struts on stock springs?
    By MacGyver in forum Brakes/Suspension/Chassis
    Replies: 8
    Last Post: 03-03-2012, 01:53 PM
  3. anyone have ssc lowerd springs & stock struts?
    By 99prixgt in forum Brakes/Suspension/Chassis
    Replies: 3
    Last Post: 09-09-2008, 03:46 AM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •