Interesting.

**Koniig** · 01-20-2013

I emailed the seller about the spring rates. I will keep everyone updated.

**matt5112** · 01-20-2013

Do you really want to be that guy who puts these on and finds out the valving is garbage?

You'll probably find your worn out bilsteins ride better/the same.

Ask bio about cheap coilovers.

**Koniig** · 01-20-2013

Originally Posted by matt5112

Do you really want to be that guy who puts these on and finds out the valving is garbage?

You'll probably find your worn out bilsteins ride better/the same.

Ask bio about cheap coilovers.

I suppose. Someone else buy them then.

**Koniig** · 01-20-2013

250 lb springs. Eh.

**Fivefingerdeathpunch** · 01-20-2013

**MoarkatsINmuhtrailer** · 01-20-2013

Originally Posted by Koniig

250 lb springs. Eh.

Good luck with those...

**Koniig** · 01-21-2013

I mean realistically, if it came down to it, I guess one could buy different springs on Summit or something.

**MoarkatsINmuhtrailer** · 01-21-2013

But then the struts will not be right for the spring rates.

**Koniig** · 01-21-2013

Originally Posted by 99PGPGT

But then the struts will not be right for the spring rates.

True. Well I suppose if someone else would like to take a stab at these, then we would all be curious. I doubt I'm going to be the one to do it.

**MoarkatsINmuhtrailer** · 01-21-2013

Originally Posted by Koniig

True. Well I suppose if someone else would like to take a stab at these, then we would all be curious. I doubt I'm going to be the one to do it.

Good....... Goooooood

**Bio248** · 01-21-2013

bet if you buy them, revalve them, and put better springs on them you'd have a better set of coilovers than you would have, for cheaper, than if you'd buy them from araut/HT/held.

**Sandman** · 01-21-2013

Originally Posted by Bio248

bet if you buy them, revalve them, and put better springs on them you'd have a better set of coilovers than you would have, for cheaper, than if you'd buy them from araut/HT/held.

This, springs are cheap, the revalving will probably be around $200 a set. Koni does rebuilds/revalving for $180 +parts

**Bio248** · 01-21-2013

and i bet after being revalved you can probably get top of the line valving done and they'd be an awesome set of struts.

typically struts can be valved to handle a range of spring rates (say 6k-10k).

**Sandman** · 01-21-2013

Originally Posted by Bio248

and i bet after being revalved you can probably get top of the line valving done and they'd be an awesome set of struts.

typically struts can be valved to handle a range of spring rates (say 6k-10k).

I still want my suspension to do it's job lol

**Koniig** · 01-21-2013

Originally Posted by Bio248

bet if you buy them, revalve them, and put better springs on them you'd have a better set of coilovers than you would have, for cheaper, than if you'd buy them from araut/HT/held.

This is so tempting. That's ideally what I would like to do. Springs are cheap enough.

**Koniig** · 01-21-2013

Anyone have any idea where I could get these things revalved?

**Koniig** · 01-21-2013

Also, after looking at the thread below this one regarding coilovers, it looks like Drunkie suggests 200-300# springs. So, would new springs on these be necessary since they are 250#?