Do I need a hydraulic press to press the bushings together or can i just use a bottle jack from underneath. Its the back two bushings on the subframe FWD(if that helps). Basically is there any way to do it without completely removing the subframe?
|
|
01-28-2012
Do I need a hydraulic press to press the bushings together or can i just use a bottle jack from underneath. Its the back two bushings on the subframe FWD(if that helps). Basically is there any way to do it without completely removing the subframe?
01-28-2012
get the car in the air, and put a jack under the middle of the back part of the cradle, remove the 2 18mm bolts lower the jack like 2 inches or so, then slide the bushing out, and replace, jack the cradle back up and bolt it up.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
