Thread: ABS Issue without code

My daughter complained that the anti-lock brakes are kicking in when braking, more prevalent during cornering. She is not getting any kind of indicators on either the dash or the DIC. I assume that I have a sensor going bad in one of the bearings, but, how do I determine which one. Any diagnostics I can perform to at least narrow it down? Or, anything I can check?

I did a search and didn't find much.

Thanks in advance,
John

I have the Torque App on my phone for my OBD II Elm 327, is it possible to get individual wheel speeds

Found it, surprised it didn't throw a code. Found electrical tape on the abs sensor wires where it was secured to the control arm. I removed the tape and found that a new connector had been spliced in, different colored wires. The connections were very corroded. I cut out the crimp connector and cleaned it up and reconnected and sealed up. Took a test drive and no pulsing any more.

Gotta love free fixes.

Thanks all!

I agree, started front DS, nothing stuck out, then front PS. Still no signs of the symptom, still surprised if didn't give any indications via the DIC.

Thanks all,
John