I replaced the battery in the keyless remote and now it doesn't work. I held the lock and unlock buttons for 7 seconds to reset the remote and it still doesn't work. Does anyone have any suggestions? Thank you in advance.
|
|
01-17-2011
I replaced the battery in the keyless remote and now it doesn't work. I held the lock and unlock buttons for 7 seconds to reset the remote and it still doesn't work. Does anyone have any suggestions? Thank you in advance.
01-18-2011
i assume it didnt work before thats why you replaced the battery. have you checked the actuators?
01-19-2011
It was working, but it was weak, you had to be close to the car for it to lock/unlock. I assumed the battery was in need or replacement.
01-19-2011
You have to reprogram the transmitter to the car.
01-20-2011
I'm not too familar on how to do this, where can I get instructions? Thanks.
01-20-2011
Try pressing the unlock and lock buttons at the same time till the horn honks, if that dont work lmk
01-20-2011
Are you sure the 'new' battery is good? Make sure it is not in backwards/upside down and that everything is making good contact. Do you still have the old battery to test?Originally Posted by wagatlng
You shouldn't need to re-program, at most you just need to re-sync the remote to the car. miker56's instruction should do that.
Re-programing instructions will vary depending on the year model or your car.
Google is your friend there...
01-21-2011
its common for the metal piece that connects the positive side of the battery to the board to separate from the board entirely.
Are you sure its still there?
01-23-2011
Sorry about the dealy, but I was out of town. I tried holding the lock/unlcok buttons for 7 seconds and that did not work. I tried to test the old battery and that does not work either.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
