Thread: How to Remove Radio?

there is no aux input...get an aftermarket HU (headunit)! If you have a GTP there may be a cord already run but i think you would see it if there was one there...

if you want to diy though for future reference, you pop off the ignition bezel first with a flat object (i used a flathead screwdriver with some electrical tape over it to prevent scratches).

then start at the lower left hand corner of the trim and start pulling it off. it seems pretty flimsy and feels like it will break, but if you are careful it will come off...

from there you must start at the bottom and remove the storage din, then the hvac control, then finally the stereo with the appropriate socket...

voila...

also just noticed u were in AL...i'm near b'ham, so if you ever need help, i'm more than happy to!

Originally Posted by vailskier3

there is no aux input...get an aftermarket HU (headunit)! If you have a GTP there may be a cord already run but i think you would see it if there was one there...

if you want to diy though for future reference, you pop off the ignition bezel first with a flat object (i used a flathead screwdriver with some electrical tape over it to prevent scratches).

then start at the lower left hand corner of the trim and start pulling it off. it seems pretty flimsy and feels like it will break, but if you are careful it will come off...

from there you must start at the bottom and remove the storage din, then the hvac control, then finally the stereo with the appropriate socket...

voila...

He's Completely 100% right...great job vailski

yeah, just put in my new system that i got for free from my buddy...he gave me 2 10" sony xplod subs in boxes and a fosgate amp...i just had to buy a wiring kit (15 bucks on ebay), and install it! took me about 3 hours total running all the wires and troubleshooting lol. it sounds pretty good though...

for free, you cant beat it...rockford amps are pretty good. how did u run ur hot wire? under the carpet or under the car? I did mines under the carpet and caught pure hell when I tried to come out the back of the console to under the rear floor.

i did mine under the carpet...didn't really have any problems with it at all. i went from the battery to underneath where the cabin air filter is, and down into the front passenger fender. then down into the black hose where the power wires go for the mirrors, windows, etc. from there i went into the car and under the carpet. i then followed the door trim back to the back seat. its not the best setup, but it works for me...

Originally Posted by vailskier3

i did mine under the carpet...didn't really have any problems with it at all. i went from the battery to underneath where the cabin air filter is, and down into the front passenger fender. then down into the black hose where the power wires go for the mirrors, windows, etc. from there i went into the car and under the carpet. i then followed the door trim back to the back seat. its not the best setup, but it works for me...

ah see...I caught hell cause I went straight under the console...thats ruff way to do it but there's not a single sign of a 4g wire there