Thread: Key Fob programming

Anyone have any experience using scanners that will program new key fobs? Both my 2004 and 2008 Grand Prix's are down to one fob. I would rather not go to the dealer, a locksmith coming out to do both is an option but if there is a scanner that would do it for a couple hundred bucks I would consider that also. I already purchase new fobs for both off eBay. Any thoughts or suggestions is appreciated. Thanks

This doesn't answer your question, but I was just looking into this again just days ago, and I have settled on this as the answer...

"2005 Pontiac Grand Prix Keyless Entry Remote Fob Smart Key Programming InstructionsThere is no manual on board procedure to program a keyless remote to this vehicle. This
vehicle requires special equipment be connected to the vehicle to program the remote", BestKeys, Amazon.

Yes, already known but thanks for responding.

I came across this suggested item AFTER I made my own transmitter purchase (typical). Experiences are across the board, typical wrong instructions, inconsistency in the application claims, and dependent on original equipment, but several successful reviews.

https://www.amazon.com/APDTY-24843-R.../dp/B00IKHVK5O

I stopped by a local shop in town, the owner is a friend and he has a high end scanner. He was able to program one new remote, but was unable to do them all(lose the old when the new is programmed) . He is going to look into it. Should be able to do all, probably just a step we are missing. He was busy the day I stopped by, at least for now my remote is new with no cracked case.I will post back when I get it resolved

This is not compatible with my car as I have factory remote start, but thank you.

I've read ..."program them during the same programming cycle" and i.e. press the transmitter buttons, etc...

BTW, they have one with remote starting.
Also, I thought I read mentioning that the programmer only has three uses - that wasn't clear.