Im gonna spray my car here shortly but idk what plugs to get or anything i know i can only do a 100 shot so anything else i need 2 kno
|
i know alot of people who spray there gxps...what kit are you going with?
Pull timing and have some fun.
id go with a wet kit (hopefully you have) just for the kick in the pants factor. as for a plate you can mount your nozzle several different ways. if you have a cai intakes just tap into it (post maf) and use some apoxy to seal the nozzle into the hole youve tapped
Tap the nozzle through your MAF.
I would say stock or one range colder should be good.
one range colder and again just tap into the tubing for the intake. closer to the intake manifold the better
Colder plugs are better for spray...less chance of detonation...and a close gap...
You can always just cut a little hole in the factory rubber intake to mount the nozzle...that way it looks all stock and sh1t.
But I'd also do exhaust mods before spraying it...Nitrous cars like to breathe maino.
Depends on the size of the shot
I wouldn't go any bigger than a 100 wet shot with the stock motor and I would recommend one range colder plug as thats what I have read for lews posts on tuned cars
« Previous Thread | Next Thread » |
Tags for this Thread |