Thread: Won't start, has fuel and spark

Page 1 of 2 12 LastLast
Results 1 to 20 of 31
  1. #1 Won't start, has fuel and spark 
    GT Level Member
    Join Date
    Aug 2013
    Location
    Kitimat, B.C.
    Posts
    267
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Been plagued with a rich fuel trim prob so I chased down a leak to the supercharger gasket, still leaked after the first one so I pulled it apart and put another new one in. It ran before I re- replaced the gasket. I have fuel pressure, spark plugs are wet and I have spark but it won't run. Here's a short vid, I also have a scan from hptuners if interested.

    http://www.youtube.com/watch?v=NeGzdRGDFmo

    86 Fiero se convertible 3800sc 4t65e HD(2002), Gen V, 3.3 pulley, SD headers
    Reply With Quote  
     

  2. #2 Re: Won't start, has fuel and spark 
    Moderator dsmuts's Avatar
    Join Date
    Feb 2011
    Location
    Coldwater, OH
    Posts
    15,758
    Thanks (Received)
    1
    Likes (Received)
    1
    Dislikes (Received)
    0
    Did you double check everything was plugged back in? How did you determine you have spark?
    98 GTP modded 1.9's, sd headers, 3.4", zzp 1.0 230K miles scrapped.
    04 Comp G zzp stb's, UMI ta's, Speedbuilt sways, bully flo heads, XP, zzp headers, fsic, thrasher shift kit, 60#, 2.6" corsa 2.5", Inferno hood
    01 gt z7 turbo tep trans zzp motor
    08 g8 gt cam exhaust 11.87@118
    Reply With Quote  
     

  3. #3 Re: Won't start, has fuel and spark 
    GT Level Member
    Join Date
    Aug 2013
    Location
    Kitimat, B.C.
    Posts
    267
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by dsmuts View Post
    Did you double check everything was plugged back in? How did you determine you have spark?
    I believe so. I have a spark tester that you plug one end on the plug and the other in the boot and it lights up as you crank. I did this all at the coil as this motors in a fiero and is a biotch to get at the front 3 cylinders.

    86 Fiero se convertible 3800sc 4t65e HD(2002), Gen V, 3.3 pulley, SD headers
    Reply With Quote  
     

  4. #4 Re: Won't start, has fuel and spark 
    Moderator dsmuts's Avatar
    Join Date
    Feb 2011
    Location
    Coldwater, OH
    Posts
    15,758
    Thanks (Received)
    1
    Likes (Received)
    1
    Dislikes (Received)
    0
    Pull one of the plugs that are easy to get at and leave it in the plug wire and lay it against the block and see if you can see spark.
    98 GTP modded 1.9's, sd headers, 3.4", zzp 1.0 230K miles scrapped.
    04 Comp G zzp stb's, UMI ta's, Speedbuilt sways, bully flo heads, XP, zzp headers, fsic, thrasher shift kit, 60#, 2.6" corsa 2.5", Inferno hood
    01 gt z7 turbo tep trans zzp motor
    08 g8 gt cam exhaust 11.87@118
    Reply With Quote  
     

  5. #5 Re: Won't start, has fuel and spark 
    GT Level Member
    Join Date
    Aug 2013
    Location
    Kitimat, B.C.
    Posts
    267
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by dsmuts View Post
    Pull one of the plugs that are easy to get at and leave it in the plug wire and lay it against the block and see if you can see spark.
    I should have mentioned that in my last response, oops. Yeah I did that but I grounded it on the strut tower bolts and yeah there was spark there. And my fuel pressures around 45ish on the guage.

    86 Fiero se convertible 3800sc 4t65e HD(2002), Gen V, 3.3 pulley, SD headers
    Reply With Quote  
     

  6. #6 Re: Won't start, has fuel and spark 
    Turbo is the way to go. Fivefingerdeathpunch's Avatar
    Join Date
    Sep 2009
    Location
    Rogers, MN
    Posts
    21,022
    Thanks (Received)
    21
    Likes (Received)
    45
    Dislikes (Received)
    0
    Either the firing order is off or there is a massive vacuum leak somewhere.

    SMGPFC Member #1
    Reply With Quote  
     

  7. #7 Re: Won't start, has fuel and spark 
    GT Level Member
    Join Date
    Aug 2013
    Location
    Kitimat, B.C.
    Posts
    267
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by Fivefingerdeathpunch View Post
    Either the firing order is off or there is a massive vacuum leak somewhere.
    I never touched the firing order myself. I figured it might be a vacuum leak so I pressurized the intake through the throttle body and there was a very slow leak down, less than before when it was running.

    86 Fiero se convertible 3800sc 4t65e HD(2002), Gen V, 3.3 pulley, SD headers
    Reply With Quote  
     

  8. #8 Re: Won't start, has fuel and spark 
    Turbo is the way to go. Fivefingerdeathpunch's Avatar
    Join Date
    Sep 2009
    Location
    Rogers, MN
    Posts
    21,022
    Thanks (Received)
    21
    Likes (Received)
    45
    Dislikes (Received)
    0
    Spray some starting fluid or brake cleaner in a vaccum line or unplug the MAF sensor and try again.

    Something is not working together, maybe a vats code or something.

    SMGPFC Member #1
    Reply With Quote  
     

  9. #9 Re: Won't start, has fuel and spark 
    GT Level Member
    Join Date
    Aug 2013
    Location
    Kitimat, B.C.
    Posts
    267
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by Fivefingerdeathpunch View Post
    Spray some starting fluid or brake cleaner in a vaccum line or unplug the MAF sensor and try again.

    Something is not working together, maybe a vats code or something.
    I could try the starting fluid to see if it'll run that way. I did previously disconnect the maf but no change.

    86 Fiero se convertible 3800sc 4t65e HD(2002), Gen V, 3.3 pulley, SD headers
    Reply With Quote  
     

  10. #10 Re: Won't start, has fuel and spark 
    GT Level Member
    Join Date
    Aug 2013
    Location
    Kitimat, B.C.
    Posts
    267
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I tried starting fluid through a vacuum port on the top of the motor(octopus) and no change in the way it's turning over.

    86 Fiero se convertible 3800sc 4t65e HD(2002), Gen V, 3.3 pulley, SD headers
    Reply With Quote  
     

  11. #11 Re: Won't start, has fuel and spark 
    GT Level Member
    Join Date
    Aug 2013
    Location
    Kitimat, B.C.
    Posts
    267
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I was playing around testing the icm and crank sensors as per

    http://easyautodiagnostics....gnition_module_1.php

    I followed it through and all is good until i got to part 6 where you test the signal from the 3x and it says if the led blinks, the ICM is bad. Well mine blinked, but i have spark.. Confused.

    86 Fiero se convertible 3800sc 4t65e HD(2002), Gen V, 3.3 pulley, SD headers
    Reply With Quote  
     

  12. #12 Re: Won't start, has fuel and spark 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    it can happen like that. the icm maybe throwing the sparks at the wrong time or weak spark.

    if you got a junk yard near by pick up a used one and swap it.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  13. #13 Re: Won't start, has fuel and spark 
    GT Level Member
    Join Date
    Aug 2013
    Location
    Kitimat, B.C.
    Posts
    267
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by Scottydoggs View Post
    it can happen like that. the icm maybe throwing the sparks at the wrong time or weak spark.

    if you got a junk yard near by pick up a used one and swap it.
    the problem with our junk yards is that they want similar to new prices for old crap. Theres one about 6 hrs away and they want $150 for it, I told the guy I can buy a new one from napa for $190, he said thats the best he can do then hung up. Anyone know th epart number for these icm's, I found a couple different ones that look the same but different numbers.

    86 Fiero se convertible 3800sc 4t65e HD(2002), Gen V, 3.3 pulley, SD headers
    Reply With Quote  
     

  14. #14 Re: Won't start, has fuel and spark 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    try ebay. they are all the same, n/a s/c park ave, montie, regal.

    look up your icm on a parts store site, you'll have one part # to go off.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  15. #15 Re: Won't start, has fuel and spark 
    GT Level Member
    Join Date
    Aug 2013
    Location
    Kitimat, B.C.
    Posts
    267
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by Scottydoggs View Post
    try ebay. they are all the same, n/a s/c park ave, montie, regal.

    look up your icm on a parts store site, you'll have one part # to go off.
    I tried that on one and i got a few different part numbers that they all said would fit and that didn't seem right. But some of the problem is they don't have an option for the supercharged motor.

    86 Fiero se convertible 3800sc 4t65e HD(2002), Gen V, 3.3 pulley, SD headers
    Reply With Quote  
     

  16. #16 Re: Won't start, has fuel and spark 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  17. #17 Re: Won't start, has fuel and spark 
    GT Level Member
    Join Date
    Aug 2013
    Location
    Kitimat, B.C.
    Posts
    267
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by Scottydoggs View Post

    awesome thanks, i was trying the places i knew, not much in canada. Atleast they had the supercharged option, i didn't think the n/a was interchangable

    86 Fiero se convertible 3800sc 4t65e HD(2002), Gen V, 3.3 pulley, SD headers
    Reply With Quote  
     

  18. #18 Re: Won't start, has fuel and spark 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    http://www.grandprixforums.net/threa...04#post1191104 heres one listed for 15 bucks. not sure what the shipping to up north will add tho.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  19. #19 Re: Won't start, has fuel and spark 
    GT Level Member
    Join Date
    Aug 2013
    Location
    Kitimat, B.C.
    Posts
    267
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Quote Originally Posted by Scottydoggs View Post
    http://www.grandprixforums.net/threa...04#post1191104 heres one listed for 15 bucks. not sure what the shipping to up north will add tho.
    Awesome thanks for that.

    86 Fiero se convertible 3800sc 4t65e HD(2002), Gen V, 3.3 pulley, SD headers
    Reply With Quote  
     

  20. #20 Re: Won't start, has fuel and spark 
    GT Level Member
    Join Date
    Aug 2013
    Location
    Kitimat, B.C.
    Posts
    267
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I quickly replaced the icm and it's still not running. At least before it sounded like it wanted to run and now it just cranks over. I will have to test this one as well when I get the chance.

    86 Fiero se convertible 3800sc 4t65e HD(2002), Gen V, 3.3 pulley, SD headers
    Reply With Quote  
     

Page 1 of 2 12 LastLast

Similar Threads

  1. Replies: 6
    Last Post: 07-20-2021, 09:27 PM
  2. have spark and fuel pressure. no start
    By m17davis in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 36
    Last Post: 12-29-2012, 12:26 PM
  3. Car won't start << No Spark>> please help!
    By Pipeliner in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 7
    Last Post: 09-27-2011, 08:40 AM
  4. No Start, No Spark. Whats up ?! 97 GP GTP
    By guimond47 in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 5
    Last Post: 06-07-2011, 03:39 PM
  5. HELP car won't start, got fuel, got spark, got air?
    By bezemom in forum General Tech Discussion
    Replies: 1
    Last Post: 05-29-2009, 02:19 PM
Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •