Thread: help! 2000 gtp stalls randomly then starts up 5 minutes later!

Hand tools method:
Loosen lug nuts
Jack and support the passenger side of the car.
Remove the tension from the belt(s) and let them sit there.
Remove the passengerside wheel (stock is 19mm)
Remove the plastic splash shield that keeps you from seeing the harmonic balancer. (trim pop tool and sometimes phillips screwdriver)

Remove the flexplate inspection cover.
Hold flex with a pair of vice grips

With a 24mm socket, remove the harmonic balancer bolt.
Using an HB/steering wheel puller find the correct pieces to pull the balancer because the bolt hole area can be quite long. It requires the short rod and pulling piece in my kit. Along with three bolts M6 x 1.00 and 70-75mm in length. Check that you have these bolts before trying this procedure. 1/4 by 20 bolts will work in a pinch.
Pull the balancer off and set it aside

then theres the red neck way. not a grand prix but its the same deal.

<span style="color: rgb(51, 51, 51); background-color: rgb(250, 250, 250);">

You will 100% want an impact, it's much easier to put it back on that way...

Redneck that thing off!

Yes.

are you fuking kidding me? go read the god damn how to i posted, and quoted from, my god man!!!!!!