yea its gtp pcm with a gt trans bin
|
|
03-27-2012
yea its gtp pcm with a gt trans bin
03-27-2012
Have you tried installing the GT PCM and see if the same thing happens. Do you still have the L36 MAP sensor?
03-27-2012
It starts but doesn't run well, yea i still have the l36 map
03-27-2012
If it starts with the old PCM without uplugging the MAP then I would guess that your PCM is jacked up. You need a PCM from a reputable supplier.
03-27-2012
I was looking overkill's pcm and thinking about getting one
03-27-2012
Are you sure you have the MAP wired correctly? Sounds like a bad MAP to me not a bad PCM
Do you have access to the file that is on the PCM or better yet...Who did you get the PCM from?
03-27-2012
I'm pretty sure I did, i just matched wire colors up.
I'm tring to find the post of the guy I bought the pcm from, but they all seemed to disappered. I know he lives up here by me in Sioux Falls, South Dakota. He drives a 99 ( i think) black 2 door gtp
03-27-2012
It finally showed a code P0107, It still shows boost
03-27-2012
Check the connector for voltage. If you are getting 5V at the connector IIRC than I would assume its the MAP sensor itself.Originally Posted by grandamle91
Last edited by Pure2sin; 03-27-2012 at 08:12 PM.
03-27-2012
It doesnt sound like its running properly.
03-27-2012
Heres a video i did last night
03-03-2014
. What was the issue because I'm having the same problem
03-03-2014
still haven't figured it out, it won't start with the map plugged in. I've tried different maps, no luck. I can start it then plug in the map and runs fine
03-03-2014
Yea I juss can't seem to figure it out
03-04-2014
So it wouldn't start with the map plugged in
03-04-2014
Also did u do anything for a fuel pump
03-04-2014
What MAP are you using and what file?
03-05-2014
map is a 2 bar and pcm is 98... info on page 1
my guess is the tune is not correct. you say the pcm is a 98 but you have a 99 tb/maf. the base files are diff there. who knows what else is incorrect in the file. if you have access to a DHP i can give you a hand setting up the file. my money is on the maf not set up correctly and the improper matching of maf tables...
have you tried to wire back in a l36 map?
what all have you tried in the past 2 years?
03-05-2014
The tune is from zzp so that's good but I am also using a fuel rail from zzp come to find out that the fuel rail they gave me was using a gen 1 fuel regulator that wasn't keeping pressure and letting fuel in the vac line so they are making me a new fuel rail with the gen 2 regulator so we shall see how it goes
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
