Figured that was pretty obvious lolOriginally Posted by Nixon
Point is if Bio was doing heads and a proper cam he'd easily attain his goal on the little TVS.
|
|
12-21-2011
Figured that was pretty obvious lol
Point is if Bio was doing heads and a proper cam he'd easily attain his goal on the little TVS.
12-21-2011
And while that TVS swap you did obviously showed dyno proven gains...I'm sure Nick wouldn't even consider it because it isn't very loud...he'd say "It just doesn't whine enough"...even though he wouldn't make as much power. Just how he is.
12-21-2011
Thats the one part where the TVS fails.
They're not as brutal sounding.
12-21-2011
Yeah it's almost silent on 7Psi. Rips pretty nice on 14 though.
12-21-2011
To be fair, the sound's coming from the smaller pulley (increased rpm), rather than increased pressure, right?
12-21-2011
What pulley for 7psi
12-21-2011
4.2"
12-21-2011
Interested.
12-21-2011
If my ears are not bleeding the S/C is not loud enough. Just sayin.
12-21-2011
On my setup I was seeing about 7.5-8psi on the 3.15''
13psi on the 2.8''
It peaks a little higher and starts a little lower, those are about the averages.
12-21-2011
this.
given that a blower produces gains as well as volume, i am interested. therefore most OEM application blowers just aren't for me. my m90 on a 3.2 was miles beyond what yours sounds like right now.
knowing that scott likes to kill my dreams, what kind of blower can i slap on this motor without pushing it stupidly outside of its efficiency and still make good power? most likely i will end up pushing the m90 past where it is useful to me considering i want to push a boost bleeding cam as far as i can go with it.
12-21-2011
The m90 is likely going to be the loudest blower.
12-21-2011
No.... M62
12-21-2011
loooooooooool no pulley, run on snout shaft.
but for serious, looks like you're going to want a gen V.
12-21-2011
need some vids of Orangl67s E85 Gen5 car!!!
12-21-2011
Loud? Here's my gen5
http://www.youtube.com/watch?v=GxMGI...e_gdata_player
On that same note, there is a mp62 with a 2.8 pulley on a 2.7 v6 tib. Loud as hell too
Again. Besides possibly not needin an intercooler, Why spend all that money to not hear it ? It will be like any other 330whp n/a car lol.
12-22-2011
I dont think he's got any driving vids of it yet. He just uploaded a video with the Gen V and E85 11 days ago. He plans on running a 2.8"
I'm sure you've seen this vid but he's running a 2.8". Not sure if that's Gen III or V, though.
Last edited by PurpleGuy; 12-22-2011 at 12:15 AM.
12-22-2011
Man...that car pulls slower than poop, Austin.
LOL.
I'm for Nick's motor to probably look just like this...
12-22-2011
Why do I feel like this whole TVS 350whp thing is so deceptive? If you have 2 pulls on this, why not actually explain what is going on instead of just posting 1/4 of a dyno graph?
12-22-2011
It just looks like it Blue. The car runs 12.7's.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
