|
|
11-13-2011
Hey guys found out wen i was rotating my supercharger pulley that the shaft would sort of get hard to turn a one spot and would make a clunk noise.. Check out the video below ... How do i change those bearings .. Do i need a new supercharger?
Gtp supercharger - YouTube
11-13-2011
Look on ebay for a supercharger rebuild kit. It should come with bearings a coupler and supercharger oil.
Originally Posted by W-Body Store
11-13-2011
Yea i know that but how do i take off the end gears to remove the turbines from the center plate?
11-13-2011
It looks like you may need your impellers re-coated. They were definitely grinding on the housing. I would just get a new s/c from here or a local junkyard
11-13-2011
Sudbury eh...the big nickel. Been there twice..
Anywho...that scoring in the housing cant be good, but i'm not a supercharger guy, I work with Diesels with Turbo's all day long on farm equipment.
Jay
11-13-2011
Yea it isent good i wanna know how to change those bearing and i dont care about the coating atm lol
11-13-2011
I dont think the coating is the issue at the moment, I would be more concerned with the condition of the case.
11-13-2011
The scratches arent more then 1mm deep . Its like scuff marks . I can get away with sanding it down lightly but wat im concerned about is how to change those bearings lol
11-13-2011
i'd just get a used s/c they are cheap enough, i bet it cost less to get a used one than rebuild yours, and your case is in bad shape it will never flow right.
11-13-2011
Ok will do . Ill call my junk yard tomarrow.. Sadly enough that all this is happening to me wen im try to sell the damn thing lol . But yea i hope they still have the sc off the motor i was ripping apart because thats the only sc in my area that i know of lol
11-14-2011
I went to my junk yard and checked out 2 superchargers and they both had those loose turbines and the cassing had ware in it like mine seen in the video.. Is that normal for every supercharger? To have the ware ?
11-14-2011
i can sell you one i got, coating is fine, i just put a new coupler in it. if your interested.
11-14-2011
How much cause i can get one for 120$ in my area with lim heads fuel rails and such only 190 km on it
11-14-2011
arent you supercharged already?
11-14-2011
Yea but how much u selling me yours for
11-15-2011
I would just rebuild with new bearings. The coating and housing are bad, but nothing that would cause it to catastrophically fail or tick etc.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
