I wonder if it would be easier if you got the Australian M90 and LIM for your conversion
Not sure if our thermostat housing is different to the us version
|
|
01-15-2011
I wonder if it would be easier if you got the Australian M90 and LIM for your conversion
Not sure if our thermostat housing is different to the us version
01-15-2011
That still might not clear the firewall.Originally Posted by vsl67
Also looks pretty restrictive. they should have had the snout on the rear a la LS9 etc.
How much do they normally go for?
Dave/trannyman has a thread of his own swap. He put the intake piping on the other side and used an H body coil bracket. That seemed to result in more belt wrap.
01-15-2011
I wonder if it would be easier if you got the Australian M90 and LIM for your conversion
Not sure if our thermostat housing is different to the us version
matt answered that for me plus i don't know anyway of getting parts from Australia.
01-15-2011
You Can usually pick them up on Ebay or The forums From About $250 - $450 for the housing and U depending on condition or mods Most people here wouldnt have any problems posting to the US ,but the trick for you guys is to wait until our dollar goes to **** again and get it cheaper
Heres some photos of the fire wall clearance in a Vs holden
And also the U bend Which you can buy a carbon fiber version here thats takes a ls1 Tb 10mm bigger internally with better fire wall clearance than the standard The one pictured has been mildly ported and internally polished but Ive seen them opened up a lot more than this
Last edited by vsl67; 01-16-2011 at 12:04 AM.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
