hi i recently bought a used keyless remote entry from ebay but when i follow the instructions that came with it and try to syncronize it with my car it doesnt work what shuld i do
|
|
06-27-2009
hi i recently bought a used keyless remote entry from ebay but when i follow the instructions that came with it and try to syncronize it with my car it doesnt work what shuld i do
06-30-2009
i've had the same problem and was told that i'd have to go to a dealer to get it synchronized.
06-30-2009
Negative.
Important note - you MUST program all of your keyless remotes when you do this - NOT JUST THE NEW ONE. You are in essence - changing the channel/remote address of the vehicle and remote, and your old remotes will not work.
1) Get in car and close all doors.
2) In the fuse panel - remove the "MALL PGM" fuse - do not lose this!
3) Insert key and turn ignition to ACC position - you should hear the interior chime once
4) Turn key to "off" and quickly back to ACC.
5) Open and close the driver's door. You should hear 1 chime - this will indicate that the system has entered diagnostic mode.
6) Press and hold both the lock and unlock buttons on the transmitter (key fob) - for approximately 15 seconds. You should hear a chime after 7 seconds, DO NOT RELEASE THE BUTTONS - continue to hold for a second chime.
7) Repeat step 6 for each transmitter. (maximum of 4 can be programmed for each vehicle)
8) If you're finished programming, turn ignition off.
9) Replace “MALL PGM” fuse.
10) Open Door(s).
11) Test transmitters.
-Swash
Last edited by Swash; 06-30-2009 at 03:59 PM.
- sold
06-30-2009
I currently do not keyless entry. Would I be able to buy a key fob and program it or would my car not be set up for it? If my car is not set up for it what is a good kit? Sorrry for the thread jack.
06-30-2009
the only problem i have is my car doesnt go to acc it doesnt work i got it to acc one time i never can do it it gets stuck
07-01-2009
If your car wasn't built with the 1SC option package - then you don't have RKE capability.Originally Posted by 01GTP
-Swash
- sold
07-01-2009
it worked it worked i tried my spare key and it works thanks for everything everybody
07-01-2009
Thanks to Swash for excellent help!
07-01-2009
Good deal - glad I could help.
-Swash
- sold
07-01-2009
swash does this work for 04+ models?
07-01-2009
Yessir!
-Swash
- sold
07-01-2009
The only issue I've got is that my keyless range is crap! I've replaced the batteries in both Key fobs, but I receive the same result.
I guess before I try and attack the receiver, I could try to reprogram both fobs in hopes that it might refresh the computer?, Who knows?
07-01-2009
OK thanks
07-01-2009
Bah! The reprogramming of both the FOB's worked, but it didn't increase the range. I supposed I'll have to hunt for the elusive receiver box/antenna...
Anyone know of an easy way to access it? (or even where it is?)
07-16-2012
Bumping this info.. mine chimes 4 times... not one...
07-16-2012
The receiver is the silvery box behind the dic
Originally Posted by TLSheff
07-16-2012
Hey! Thanks I knew that just couldn't remember where it was lol. I took it out one time
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
