Thread: Won’t start after sitting for a year (2006)

Page 1 of 2 12 LastLast
Results 1 to 20 of 30
  1. #1 Won’t start after sitting for a year (2006) 
    SE Level Member
    Join Date
    Jan 2016
    Location
    Tucson, AZ
    Posts
    38
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I got some tips in the chat section on my desktop but can’t find that on my phone.
    Anyway, I replaced the battery, had the starter rebuilt and retested after the fact.
    Voltmeter says I’m getting like 1.8-2.4 to the ignition (?) wire at the starter (the purple one). Thinking my problem might be the ignition switch? Any input is greatly appreciated.
    Reply With Quote  
     

  2. #2 Re: Won’t start after sitting for a year (2006) 
    SE Level Member
    Join Date
    Jan 2016
    Location
    Tucson, AZ
    Posts
    38
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    No issues from sitting. Crank turns and no wires are chewed through, no nests or anything. Just some cobwebs.
    Reply With Quote  
     

  3. #3 Re: Won’t start after sitting for a year (2006) 
    SE Level Member
    Join Date
    Jan 2016
    Location
    Tucson, AZ
    Posts
    38
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I’ve also tried to hot wire the starter (running a wire from the positive post of the battery to the small post on the starter (where the purple ignition wire is connected) with no success
    Reply With Quote  
     

  4. #4 Re: Won’t start after sitting for a year (2006) 
    Turbo is the way to go. BillBoost37's Avatar
    Join Date
    Jul 2009
    Location
    W Spfld
    Posts
    26,815
    Thanks (Received)
    53
    Likes (Received)
    90
    Dislikes (Received)
    1
    That would mean something is up with the starter. Do this though.. instead of running a wire from battery to starter....just use a screwdriver to touch the positive battery cable post on the starter to the purple connection.
    I drink..so consider that when reading my posts.

    2010 Audi A6 Dual IC's
    Reply With Quote  
     

  5. #5 Re: Won’t start after sitting for a year (2006) 
    SE Level Member
    Join Date
    Jan 2016
    Location
    Tucson, AZ
    Posts
    38
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Thank you for the idea. What should happen when I do that? I’ve heard it’s a small spark, not a big one.
    Reply With Quote  
     

  6. #6 Re: Won’t start after sitting for a year (2006) 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    the starter is also grounded to the block, so a bad ground cable will also make the starter not work. you can use a jumper cable to the block and neg battery to make sure your all grounded.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  7. #7 Re: Won’t start after sitting for a year (2006) 
    SE Level Member
    Join Date
    Jan 2016
    Location
    Tucson, AZ
    Posts
    38
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    That’s a question I have. How is it grounded? There’s a second wire that goes attaches at the same post as the positive battery wire. For some reason that seems incorrect.
    Reply With Quote  
     

  8. #8 Re: Won’t start after sitting for a year (2006) 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    neg cable bolts to the trans bell housing near the starter.

    where does this second wire off the pos post go to? is it a wire, or a cable.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  9. #9 Re: Won’t start after sitting for a year (2006) 
    SE Level Member
    Join Date
    Jan 2016
    Location
    Tucson, AZ
    Posts
    38
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Ok. So the negative cable off the battery does go to the trans bell housing just above the starter. I’ll have to check that other cable when I get back home. I did take it off and try it without and it didn’t do anything different.
    Reply With Quote  
     

  10. #10 Re: Won’t start after sitting for a year (2006) 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    neg battery to any bare metal on the engine will do. might have to clean up a bolt or the likes to clamp to.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  11. #11 Re: Won’t start after sitting for a year (2006) 
    Turbo is the way to go. BillBoost37's Avatar
    Join Date
    Jul 2009
    Location
    W Spfld
    Posts
    26,815
    Thanks (Received)
    53
    Likes (Received)
    90
    Dislikes (Received)
    1
    That second cable at the starter is expected.

    When you use that screwdriver.. it should make the starter work. If you removed the ground cable.. it's not going to work w/o that hooked up. Put all the stuff you unhooked etc, right back where it belongs and give it a try. From there we can quickly diagnose why it's not starting through a few quick tests.

    The screwdriver is to see if the starter is good because it removes the pcm, relay etc etc from the equation. Once we know the starter can turn the engine, then we work our way backwards from there by testing the purple wire for power of 12V. You mentioned a very low voltage of 1.8-2.4, this tells us you either aren't getting power to that wire or you aren't getting a good ground. If you had stuff unhooked while you were testing that... then it's not a good test that we can rely on.

    I think in your year the ignition switch sends a signal to pcm to crank engine. If the pcm sees the car in park or neutral it should send a ground signal to a relay that then engages and sends power to the purple wire of the starter. This may be as simple as a crusty relay or bad contacts in that relay. However you don't see many bad relays, it's usually something causing the relay to not be actuated.
    I drink..so consider that when reading my posts.

    2010 Audi A6 Dual IC's
    Reply With Quote  
     

  12. #12 Re: Won’t start after sitting for a year (2006) 
    SE Level Member
    Join Date
    Jan 2016
    Location
    Tucson, AZ
    Posts
    38
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Hmmm, so the screwdriver bypass only gave me a bunch of clicking. I could hear the bendix fire but the car never started. I took a video but I’m not able to paste it here.
    Reply With Quote  
     

  13. #13 Re: Won’t start after sitting for a year (2006) 
    SE Level Member
    Join Date
    Jan 2016
    Location
    Tucson, AZ
    Posts
    38
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    So I’m rechecking all my ground wires and they seem fine. Scratching my head at this point.
    Reply With Quote  
     

  14. #14 Re: Won’t start after sitting for a year (2006) 
    SE Level Member
    Join Date
    Jan 2016
    Location
    Tucson, AZ
    Posts
    38
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    I’m in Tucson AZ. Just giving as much info as I can. I’m sure a summer here is tougher on cars sitting.
    Reply With Quote  
     

  15. #15 Re: Won’t start after sitting for a year (2006) 
    Turbo is the way to go. BillBoost37's Avatar
    Join Date
    Jul 2009
    Location
    W Spfld
    Posts
    26,815
    Thanks (Received)
    53
    Likes (Received)
    90
    Dislikes (Received)
    1
    if all you get is clicking.. then you have a power problem .. The car won't start wtih a screwdriver, but it would turn the engine over.
    I drink..so consider that when reading my posts.

    2010 Audi A6 Dual IC's
    Reply With Quote  
     

  16. #16 Re: Won’t start after sitting for a year (2006) 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    try the old hammer trick yet? i few solid shot to the fat body of the starter might make it work again, if it does work after a beating, replace it, its the issue.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  17. #17 Re: Won’t start after sitting for a year (2006) 
    SE Level Member
    Join Date
    Jan 2016
    Location
    Tucson, AZ
    Posts
    38
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    Starter has been rebuilt and tested twice
    Reply With Quote  
     

  18. #18 Re: Won’t start after sitting for a year (2006) 
    SE Level Member
    Join Date
    Jan 2016
    Location
    Tucson, AZ
    Posts
    38
    Thanks (Received)
    0
    Likes (Received)
    0
    Dislikes (Received)
    0
    So if I have a power problem with a new battery and new starter where do I go from there?
    Reply With Quote  
     

  19. #19 Re: Won’t start after sitting for a year (2006) 
    Killa Bee Scottydoggs's Avatar
    Join Date
    Aug 2010
    Location
    new jersey
    Posts
    39,919
    Thanks (Received)
    63
    Likes (Received)
    166
    Dislikes (Received)
    5
    bad battery cables would be my guess, as long as the purple wire has power when the key is turned to crank.

    98 Buick Regal GS, F body brakes, Caddy STS wheels, tinted tails L36 bottom end, lightly ported heads, 1.95 roller rockers, headers, gen 5 N* 3.0 pulley, FSIC, 42 lb injectors, a BrandonHall rebuilt trans, DHP tuned and AEM water/Meth injection https://goo.gl/gpV5kW
    Reply With Quote  
     

  20. #20 Re: Won’t start after sitting for a year (2006) 
    Turbo is the way to go. BillBoost37's Avatar
    Join Date
    Jul 2009
    Location
    W Spfld
    Posts
    26,815
    Thanks (Received)
    53
    Likes (Received)
    90
    Dislikes (Received)
    1
    I got a newly rebuilt and tested starter for my boat and when installed it sucked. Under warranty another was gotten and it worked great.

    To test the starter, it's out of the car with no load on it from what I've experienced. Why was the starter rebuilt?
    I drink..so consider that when reading my posts.

    2010 Audi A6 Dual IC's
    Reply With Quote  
     

Page 1 of 2 12 LastLast

Similar Threads

  1. Trans question, sitting for almost a year
    By Dallasneon in forum 1997-2007 4 speed Automatic (4T65E) (4T65E-HD)
    Replies: 6
    Last Post: 09-30-2015, 11:21 PM
  2. a start year for better 4t65e hd builds from gm?
    By Shiftingshaddow in forum 1997-2007 4 speed Automatic (4T65E) (4T65E-HD)
    Replies: 10
    Last Post: 02-06-2013, 09:46 PM
  3. E85 hard start in mornings or after sitting a while
    By LapeerGTP in forum PCM Tuning
    Replies: 11
    Last Post: 08-06-2012, 11:28 AM
  4. adding remote start to a 2006 base GP
    By silvervipertb in forum 04+ Specifics
    Replies: 6
    Last Post: 04-04-2012, 07:37 AM
  5. What year did the factory start using the metal frame intake gasket?
    By Gasnmyveins in forum 3.8L V6 Supercharged (L67)(L32)
    Replies: 7
    Last Post: 04-02-2012, 12:32 PM
Tags for this Thread

View Tag Cloud

Bookmarks
Bookmarks
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •