|
|
01-31-2009
i want to get a wizaired intake, and i just wanted to know if one of those huge k&n filters that come with k&n's FIPK 2 intake would fit in the wizaired box? I had the k&n FIPK2 on my last GTP... and i will say i was happy with it, just didnt like the fact that it wasn't a true cold air. It looked pretty sick under the hood as well. }i was torn between getting that 1 again or the Wizaired.
01-31-2009
i believe it should be a close fit.... try n find out is all i can say good luck man!
hogan 3inch DP u bend delete ,180*tstat, autolite 104s, LED interior, 4" FWI, 2000watt system, bullitt rims, zzp pistons, pems, alt rewire, thrush muffs, 3.4 zzp mps, transgo shift kit, triple edge performance trans. autometer triple pod :SOON: urlosn HPT PCM tune, HEADERS, 1.9's
01-31-2009
get a 9" AEM cone, i dont like k&N at all, only way i would run a K&N is if i was running an open cone setup.
01-31-2009
I have a 4inch end, 9" length K&N in mine... but it has eaten a MAF sensor already
01-31-2009
If you dont mind me asking, whats an open cone mean??? never heard of this
01-31-2009
and how does that happen???Originally Posted by 02BlueGT
01-31-2009
The oil in the filter.
02-01-2009
wow didnt know that
02-01-2009
Both AEM and AMSOIL have dry-flow filters, that I would get one, if I had the extra $$
02-01-2009
I fully intend on getting an AEM fairly soon.
02-01-2009
Yeah, look at the AMSOIL one too, it looks pretty good
02-01-2009
its when you dont have any form of intake, but just a cone filter on the closest part to the throttle body.
02-01-2009
I've got an Amsoil filter. My supercharger was a little louder using the Amsoil filter compated to the Spectre Oiled filter (which is comparable to the KN, probably). Anyway check out this website, it explains amsoils nano fiber technology that they use in their filters.
AMSOIL Ea Synthetic Nanofiber Air Filter (EaA)
02-02-2009
K&N has never been provided any evidence of a MAF sensor being fouled by filter oil regardless of how much oil was used on the filter. We have tested over 100 MAF sensors allegedly harmed by filter oil and have yet to find any trace of filter oil on the sensors. What we did find was that 60% of the sensors in question were performing perfectly with no defect and had in fact been misdiagnosed. 18% of the sensors had complete electronic failures in no way due to contamination while 22% were out of tolerance. Again not a single one had a trace of filter oil on it. For more information on this issue and K&N’s consumer protection pledge go to K&N Mass Air Flow Sensor Test Results. K&N is proud to have complete quality control by doing our testing, development and manufacturing in the USA. Not only have we sold in excess of 20 million air filters worldwide but we continue to be used by many top racing teams including the winners of the 2007 Baja 1000 and Baja 500 (and the 2008 Daytona 500).
02-02-2009
Well don't that just beat all...K&N joined the GP community LOL
Not to say that your testing and such is wrong...but I did lose a Delphi MAF to K&N Filter oil...I wish I had a picture of the MAF but I guess I never thought of taking one...I had let it sit out for at least 12 hours in the sun to let dry and I didn't use any other form of drying methods...I turned the filter over and such every hour or so, so the sun could get on all of it but I guess all that did was let what oil was in the filter still...run towards the bottom. I am not by anyway knocking the K&N brand as I never had anything but success and great life from the filters I have had in the past on other cars...I just went and got a dryflow filter from O'Rielly's and it flows better than any other filter I have ever had.
Last edited by blueguy; 02-02-2009 at 08:21 PM. Reason: For a thought...
02-03-2009
mine came with a 9 inch kn filter with it
02-04-2009
Yep. Stock filter size on the Wiz is 9" length, 6" base width, and a 4" opening.
| « Previous Thread | Next Thread » |
| Tags for this Thread |
| Bookmarks |
Bookmarks |
