Thread: Maf/engine troubleshooting

I originally got a code for a bad maf, and on the way home one day the car randomly died. Well i got a new MAF, IAC, and 02 sensor and it hasn't seemed to change anything. I checked the wires on the maf and i have a 5v reference, and 0 ohms to the ground, but i havn't been able to check the wire to the pcm. When checked with a snap on modis, it showed N/A for the o2, tps, maf, and iac. It smells rich too. I have no idea what could be causing all this. It's also an 02 topswap car with parts from a 97. Thanks for any help!

Sorry was in a hurry. The top swap was done a month ago but I havnt driven for the last week while I was waiting for my sensors. It has a modified gtp file on it. My previous o2 kept setting off a CEL for not heating. Before when I thought th maf was bad, the snapon showed values for the other sensors and 0.0 volts for the maf. So that's why I changed them. I didn't leave the battery unhooked for more than five minutes. Brand new bosch o2 too. I'm getting no info from the snapon for the o2.

Anything?

Reset the fuel trims and it doesn't seem to change anything. The scanner is showing the other sensors values, but im still getting a 0.00 volts reading for the MAF. The power wire has a 5v reference, the ground wire shows one ohm @ 200 on the multimeter and the ignition 1 wire shows 150 ohms grounded to the battery. Not sure it thats any help but thats all i can think of.

MAF reads in Hz.

Volts/Hz whatever, still wasnt getting a reading. Didn't check the fuse, was told the way it was getting power meant that it was still good, i guess ill go look though.

At least you started replacing the expensive stuff first. It can only get better now. Lol

You got "a code"?

What code(s)?