I have no idea what this stuff is but I found it when I opened my oil filler cap is this normal? if not what is it?
|
condenmonsation
It means you need your intake gaskets done.
Most likely.
As in do them.
Perfect time to do your Intake gaskets...get some snythetic in there too
Check the oil on the dipstick... is it milky at all?
PS: if the engine is cold or hasnt beens started, crank it over a lil bit and then check it, want to make for certain its not milky. That will be bad for bearings, you don't want yours to sound like mine did when my crank bearings spun... GPs shouldn't sound like Diesels
So if it isn't on the dipstick...it might not be that bad...but if your losing coolant...it needs to be addressed. Buy...
-High Temp RTV, Black.
-GM Aluminum Lower Intake Gaskets for your L36
-New Coolant Elbows...you can buy them in the HELP Section at ORielly's
-Probably wouldn't hurt to do the Fuel Injector O-Rings too...they are cheap...and the PCV...its cheap too. It's under the MAP sensor on the left side of the Upper Intake Manifold.
-A Couple Bottles of 100% Antifreeze...cheap green or yellow junk...then fill the rest with water after you flush it.
-New T-Stat, I'd say get a 180* now, but everyone else will call me dumb.
-Of course...after you refill everything and get it all buttoned up...be sure to change the oil and oil filter.
Those be the ER Rockers...boss.
Good time to change your valve cover gaskets.
those like to leak as well.
Make sure you get new grommets as well
« Previous Thread | Next Thread » |
Tags for this Thread |