Hi all, I'm working on someones 94 GP 3.1 and when you turn the ignition on the accessories all work, but when you start it there isn't even a click. I thought maybe it was a bad key switch because there was no power going to the solonoid when the key was turned. Both ground and power wires are good though. I clipped the solonoid wire and made my own switch to the battery and it turns over now, with the key in "on position" of course. It now runs for about a second or two then dies. Seems to run smooth too, no shaking. I also checked all fuses under the hood. The fuel pump is priming. Guy says it just wouldn't start one day at work (no click). Does anyone know what it is? I dont know why it would run for a second then die if the ignition switch was bad? But I don't want to go through all that if that isn't it.
I've been searching on here and haven't seen this problem yet. TIA