what do i need to replace

**guy87** · 01-25-2009

im thinking of rebuilding my tranny. what do i all need? transmission kit, how about the solenoids?

**Street Wolf** · 01-26-2009

I'd replace the solenoids, clutches, get a hardened 4th clutch shaft, hardened pump shaft, upgraded input shaft to the level you need, shift kit, and gears with a single chain. Check the diff and replace it too if need be.

**guy87** · 01-26-2009

what is the cost of all the stuff? this will be my first time doing this. could i get away with just putting the clutches in and the solenoids?

TDCRacing · 01-26-2009

Well what you ''could get away with'' would more than likley depend on what is messed up or worn out in it right now.

I would do it right and do a full rebuild on it to save you time and money on it in the future.

**guy87** · 01-26-2009

where can i find the stuff at? ebay?

TDCRacing · 01-26-2009

Go to Dave's site. Triple Edge Performance - Home Page

**Trannyman95** · 01-27-2009

There is really no set list of what you will need but there is a lot of parts that should be or is recommened to replace during a rebuild. You arent going to know exactly what parts to get until the trans is apart. Is your car stock or is it modified and if so what is done to it? How far do you plan to take it?

**guy87** · 01-27-2009

i aint gonna be racing it just a car for driving. i'm gonna leave it stock

Thread: what do i need to replace

Thread Tools

Display

Similar Threads

CV Shaft Rebuild/Replace [*]

Should I and what to replace??

How Do I Replace the FRP?

How hard is it to replace tie rod ends?

Replace cam bearing with engine still in?

Bookmarks