Thread: Replacement headlight housings - do they suck?

My headlight housings are super fogged and one is also cracked. They are too far gone to be restored, so I'm looking for replacement housings. Has anybody tried the housings available on ebay/amazon and can tell me how they compare to OE housings? Just want to make sure I get a product that will work well enough to be worth spending the money. I really like the retrofitted housings, but I can't justify spending $400 on them and so I need cheaper alternatives.

04+ its retro or bust the 97-03 ebay h eadlights worked just fine for those years. everything newer sucks

Originally Posted by ItHurtz

retro or bust

This.

Or to answer his question, new stock housing from a decent vendor work just fine if you just need new headlights.

I've run like 4 different sets of new stock housings from the brand TYC without issue. After like 4-5 years they start the yellow again but by then the car is likely not be yours anymore.

That I don't know.

Depending on how the light is distributed across the ground it might just scatter even worse and cause the light to shine into other peoples eyes as they drive towards you.

In lights that have a cut off for the lenses that help point it downward and stop the scatter effect it would surely help a lot.

I bought Ebay headlights 2 years ago for my 04. Still look brand new. No fogging. I recommend. As for the fog lights there is no light distribution pattern. It would just be annoying glare to every oncoming driver. Please don't do it. There is no cut-off or good beam pattern. It is mostly for looks not for good lighting. You would be much better off to buy a set of Ebay headlights and retrofit LED or HID projectors into the housing if you want better lighting. You would get better light pattern without blinding everyone else on the road. (You know... people who throw LEDs or HID bulbs in a halogen housing with huge glare blinding every oncoming driver.)